Using active hubs you can connect 127 devices to each USB port.
at a tim one device
An Uplink Port is a port on a connectivity device, such as a hub or switch, used to connect it to another connectivity device.
u can connect a 4 port adapter to a single usb port but if u are using all for ports u may experience slow data transfer
A USB port is both and input and output port. Depends on what is connected to it as to which is functions as. Connect a camera and it is an input device. Connect a printer and it is an output device. Connect a printer/scanner and it is both.
No, The port on an ipad is a device port, not a host port. You would have to get a USB on the go adapter for iPad to connect external devices.
Use the wire cable to connect with it if you have a USB port in your computer.
It allowes someone to input a device into the computer. (Connect an ipod, flashdrive, etc.)
The Ethernet port is used to connect a computer to a connectivity device such as a modem, router, switch,etc. Does so via an ethernet cable.
Possibly the machine on the other end is not programmed to respond to this port; or the port is blocked by an intermediate device, such as a router.
external wired peripheral device must have a corresponding that connect it back to the
To connect a GPS device to a computer, you typically use a USB port, as most modern GPS devices come with a USB connection. Some older models may use a serial port (COM port), which requires a specific cable. Always check the GPS device's manual for the compatible connection type.
On a typical setup, only one device can be connected to the ports. However, if you have a special USB port, or a device that will split a USB port, you can connect 2 or more devices.