answersLogoWhite

0

Although VLANs and subnets are quite different concepts, when using VLANs, there should be a one-to-one correspondence between the two. That is, every VLAN should be in a different subnet.

Although VLANs and subnets are quite different concepts, when using VLANs, there should be a one-to-one correspondence between the two. That is, every VLAN should be in a different subnet.

Although VLANs and subnets are quite different concepts, when using VLANs, there should be a one-to-one correspondence between the two. That is, every VLAN should be in a different subnet.

Although VLANs and subnets are quite different concepts, when using VLANs, there should be a one-to-one correspondence between the two. That is, every VLAN should be in a different subnet.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do you program vlans on a switch?

how to prgram vlans on a switch


Describes a network link that carries the traffic of multiple VLANs?

all VLANs


Switches can create by grouping a number of ports into a broadcast domain?

VLANs.


How many VLANs can there be on a Catalyst 2600 series switch?

totally 1005 vlans we can create


What VLANs are allowed across a trunk when the range of allowed VLANs is set to the default value?

all VLANsThe default is to allow all VLANs through the trunking ports.


Why network engineers value vlans include a discussion on reasons for using vlans?

Network engineers value VLANs for their flexibility. They can include ports from more than one switch or segment. Any type of node can belong to one or more VLANs.


What is a static length subnet mask?

That probably refers to a situation where a larger network was divided into smaller subnets, but all subnets have the same size - as opposed to VLSM (variable length subnet masks), where subnets can have different sizes.That probably refers to a situation where a larger network was divided into smaller subnets, but all subnets have the same size - as opposed to VLSM (variable length subnet masks), where subnets can have different sizes.That probably refers to a situation where a larger network was divided into smaller subnets, but all subnets have the same size - as opposed to VLSM (variable length subnet masks), where subnets can have different sizes.That probably refers to a situation where a larger network was divided into smaller subnets, but all subnets have the same size - as opposed to VLSM (variable length subnet masks), where subnets can have different sizes.


Which statement accurately describes routing between VLANs when the default gateway addresses of the VLANs are applied to physical interfaces?

chuk norris


Where do you get your subnet number from?

You (the network administrator) decide what subnet you need to use, depending on the available IP addresses, and how you want to divide your network into subnets (in case you use subnets).You (the network administrator) decide what subnet you need to use, depending on the available IP addresses, and how you want to divide your network into subnets (in case you use subnets).You (the network administrator) decide what subnet you need to use, depending on the available IP addresses, and how you want to divide your network into subnets (in case you use subnets).You (the network administrator) decide what subnet you need to use, depending on the available IP addresses, and how you want to divide your network into subnets (in case you use subnets).


How many /64 subnets are available in a /48 prefix?

There are 65,536 subnets available in an IPv6 /48 block.


How many VLANs can be configured on a Cisco 2960 Switch?

The command "show vtp status" will show you how many vlans are supported by the switch. The Cisco 2950 switch supports up to 64 VLANs.


Which VLANs are allowed over the link when a new trunk link is configured on an IOS-based switch?

By default, all defined VLANs are allowed on the trunk.