Go to Autozone, when you purchase the bulbs, they'll put them in for free
my 2004 aztek has an 18 gallon tank
The engine coolant temperature sensor on a 2004 Pontiac Aztek is typically located near the thermostat housing, which is situated at the front of the engine. Specifically, it can be found on the engine block, often near the intake manifold. To access it, you may need to remove any obstructing components for easier visibility. Always consult the vehicle's service manual for precise location and replacement procedures.
The easiest way is to bring it to a chevy dealer, because the two were companion brands.
The front O2 sensor of a 2004 Pontiac Aztek is located on the exhaust manifold, just before the catalytic converter. It is typically positioned on the driver's side of the engine, where the exhaust gases exit the engine. You may need to lift the vehicle for better access, as it can be somewhat difficult to reach without proper clearance.
The front axle nut on a 2004 Pontiac Aztek typically has a size of 30mm. This nut is used to secure the hub assembly to the axle. Always ensure to use the correct tools and torque specifications when working on the vehicle.
a bad fuse of a faulty switch.
To unlock a Monsoon radio from a 2004 Pontiac Aztek, you’ll need the radio's serial number, which can be found on the radio itself. You can then contact a Pontiac dealer or check the Pontiac website for the unlock code. Alternatively, you may find online resources or forums where enthusiasts share unlock codes or methods. If you're looking to replace the radio, consider purchasing a compatible replacement and following installation guides specific to the Aztek.
The only thing you need to reset is the clock and radio station presets.
Yes, I have 20 inch akuza rims with nexen 245-35-zr20 tires.
No. 6 point 12mm socket. (Cant be deep well socket though, not enough clearance for that)
The fuel filter on a 2004 Pontiac Aztek is located along the frame rail on the driver's side of the vehicle, just in front of the rear axle. It is typically mounted on the underside of the vehicle, making it accessible for maintenance. To reach it, you may need to lift the vehicle for better access. Always ensure the fuel system is depressurized before attempting to replace the filter.