0
What else can I help you with?
What are the power supply needs of an E model SINCGARS radio?
If you are supplying power in vehicle or base station (using a AM-7239/VAA) it is suggested that 24Volts & 5Amps. The same type of power supply could be used in a repair shop.
Does the motherboard connect the power supply to the peripherals?
The motherboard does not connect the power supply to the peripherals. The power is supplied directly to most peripherals such as HDDs and CD drives by cables from the power supply. Some special expansion cards, such as network cards, get enough power from the motherboard through the PCI slot to function.
What power connecter should you connect to a floppy drive to a power supply?
A "Berg" connector.
Will your MacBook run off power only when battery is dead?
If your battery is dead and you connect the power supply with your battery installed, the battery will automatically start charging. If you wish to run your MacBook off your power supply only, simply remove your battery from your MacBook and connect the power supply. You will then be running solely on the power supply. If you battery becomes fully charged while your power supply is connected, you MacBook will switch to the power connector as it's power source - preserving the battery.
How can I connect LED strip lights to a power supply?
To connect LED strip lights to a power supply, first determine the voltage and current requirements of the LED strip lights. Then, match these requirements with a compatible power supply. Next, cut the LED strip lights to the desired length and strip the ends of the wires. Connect the positive () and negative (-) wires of the LED strip lights to the corresponding terminals on the power supply. Finally, plug in the power supply and test the LED strip lights to ensure they are working properly.
Can you connect a 24v dc motor to household current?
You need a DC power supply in order to connect a 24v DC motor to household power.
How to install a Whirlpool dishwasher?
To install a Whirlpool dishwasher, first turn off the power and water supply. Then, connect the water supply line and drain hose. Slide the dishwasher into place and secure it to the cabinet. Finally, connect the power supply and test the dishwasher.
How can I connect multiple LED strips to one power source?
You can connect multiple LED strips to one power source by using a power supply with enough voltage and current capacity to support all the strips. You can either connect the strips in parallel or use a distribution block to connect them in series. Make sure to calculate the total power consumption of all the strips to ensure the power supply can handle it.
What component connect to the motherboard use of the 24 pin connector?
power supply
You should connect the power cord from the power supply to the PS2 power connection on the motherboard?
To connect the power cord from the power supply to the PS2 power connection on the motherboard, locate the 4-pin connector on the power supply cable and line it up with the corresponding 4-pin PS2 power connection on the motherboard. Gently press and secure the connector into place until it clicks. Ensure the connection is secure and the power cord is properly routed to avoid any interference with other components.
If I connect 110v xbox one to a 220v outlet what will burn will the power supply burn or will the Xbox one burn?
If you connect 110V xbox one to a 220V outlet, only the power supply will burn and not the Xbox one.
How do you set up a phantom power supply for a condenser microphone?
To set up a phantom power supply for a condenser microphone, first ensure that the microphone is compatible with phantom power (typically 48V). Connect the microphone to the input of the phantom power supply using an XLR cable. Then, connect the output of the phantom power supply to your audio interface or mixer, also using an XLR cable. Finally, turn on the phantom power on the supply to provide the necessary voltage for the microphone to operate.
