The only way to ground your system if you're using plastic boxes is to continue the chain by connecting your ground wires together--just as you would with the hot and nuetral wires--through the entire circuit all the way back to the whole house gound in the circuit breaker panel.
If the plastic box has a ground wire attached to the GFCI and the ground at the fuse panel, you do not need to ground the box itself. As long as the ground wire is connected to the GFCI and the fuse panel, the box will be effectively grounded. Just ensure that all connections are secure and properly fastened.
Yes provided you have a ground, neutral and hot wire coming to the box.
yes the device must be grounded per NEC code. if the juncrion box is metal you must also sufficiently ground the box using a ground screw or clip. the ground box should be uninterrupted if the device is removed. (the device screws mounted to the box is not a suitable grounding means.
The Plastic box and lid shop
Plastic is synthetic or semi synthetic organic solids that are mold-able. Plastic electric box is one the boxes that is most commonly plastic. Junction box is also one of the common plastic boxes.
It's a Curver Box
Not if its non toxic plastic
at astroturf ground
42 inches from ground to bottom of the mail box.
No
No, plastic is an insulator. If the ground pin were made of plastic then there would be no conductivity through the pin to conduct the fault current back to the distribution panel ground. It is this current path that trips the breaker on a ground fault.
One can purchase a plastic storage box for gardening tools from GardenSite, Plastic Box Shop, Garden Buildings Direct, Tesco, Amazon, Keter and Garden Today stores.