answersLogoWhite

0

To program your BC60XLT-1 Uniden Bearcat scanner in Washington state, first, locate the frequencies for local police, fire, and emergency services, which can often be found on websites like RadioReference. Turn on the scanner and press the "MAN" button to enter manual mode, then use the keypad to enter the desired frequency. You can also program channels by accessing the "PRG" mode, selecting an empty channel, and entering the frequency. Finally, ensure that you save your settings and scan for the programmed channels.

User Avatar

AnswerBot

4mo ago

What else can I help you with?

Related Questions

How do you program a uniden bearcat BC 370 CRS scanner?

easy to program


How do program a uniden 30 channel10 band radio bearcat BC60XLT-1?

Scanner codes


How do you program a Uden Bearcat 30channel10 Band Radio scanner?

To program a Uden Bearcat 30 Channel 10 Band Radio scanner, first turn on the scanner and select the channel you want to program. Press the "Manual" button to access the channel, then press the "Program" button. Enter the desired frequency using the number keys, and confirm by pressing "Enter." Repeat this process for additional channels, and be sure to save your settings before exiting programming mode.


Where can you purchase a bearcat scanner?

One can purchase a Bearcat scanner from many online retailers as well as a few box stores. The box stores that carry this scanner would be Academy, Walmart or Target to name a few.


How do you program a uniden bearcat handheld scanner model bc245xlt?

To program a Uniden Bearcat BC245XLT handheld scanner, first power on the device and press the "MANUAL" button to select a channel. Use the keypad to enter the desired frequency, then press "E" to save it. For trunked systems, press the "TRUNK" button, select the trunk type, and enter the control channel frequency. Finally, use the "SCANNER" button to start scanning the programmed frequencies.


How do you program the bearcat bc60xlt in Tennessee?

To program the Bearcat BC60XLT scanner in Tennessee, start by identifying the frequencies used by local agencies, which can typically be found online through databases like RadioReference. Turn on the scanner and use the manual to enter the frequencies into the appropriate memory channels. You can also use the frequency search function to scan for active channels. Lastly, save your programmed frequencies and ensure the scanner is set to the right mode to listen to those channels.


Uniden bearcat scanner do you download firmware to the scanner or to my computer?

Firmware for the Uniden Bearcat scanner is typically downloaded directly to the scanner itself, not to your computer. You may need to use software on your computer to facilitate the transfer of the firmware to the scanner via a USB cable or similar connection. Always refer to the specific instructions provided by Uniden for your model to ensure proper updates.


How do you a program a uniden bearcat bc72xlt?

Follow the link to download/print the manual for your scanner. It will walk you through the programming process. http://www.uniden.com/pdf/BC72XLTom.pdf


How do you reset a Uniden bearcat scanner?

To reset a Uniden Bearcat scanner, first turn off the device. Then, while holding down the 'Hold' and 'Function' buttons, turn the scanner back on. Continue to hold the buttons until the display shows "Initializing" or "Resetting." This process will restore the scanner to its factory settings, erasing any stored frequencies and settings.


Uniden bearcat BC350A how do you program it?

To program the Uniden Bearcat BC350A, first, turn on the scanner and press the "MAN" button to select a channel. Use the numeric keypad to enter the desired frequency. Press the "E" button to store the frequency in that channel. Repeat the process for additional channels, and consult the user manual for detailed instructions on programming trunked systems or specific features.


How do you program a uninden bearcat scanner bc144xl?

To program a conventional frequency into the scanner first select a channel to program and then enter the frequency you wish to store in that channel number and finally press E. According to the manual this scanner is capable of receiving trunked communications. Due to the complexity and length of this process the link below in the Related Links section goes to the manual in PDF format that describes the process. The Programming Trunked Systems chapter begins on page 40.


How do you program a bearcat BDC396T digital trunking handheld scanner?

To program a Bearcat BDC396T digital trunking handheld scanner, first, turn on the device and enter the Menu by pressing the "Menu" button. Navigate to the "Program System" option to create a new system for your desired trunked frequency, then input the specific frequencies or use the built-in database to select your local trunked systems. You can also set up channels within the system to monitor specific talk groups. Finally, save your settings and begin scanning by pressing the "Scan" button.