To replace Bank 1 Sensor 1 (the upstream oxygen sensor) on a 2002 Lincoln LS, first, ensure the engine is cool and disconnect the negative battery cable. Locate the sensor on the exhaust manifold on the driver's side, then unplug the electrical connector. Use an oxygen sensor socket or wrench to unscrew the old sensor, and install the new sensor by threading it in and tightening it securely. Finally, reconnect the electrical connector and the negative battery cable.
Bank1 is the passenger side of the engine in your Lincoln LS ( V6 and V8 ) Sensor 1 would be close to the engine before the exhaust enters the catalytic converter
You can replace the oxygen sensor on a 2002 lincoln LS by first unplugging the old one and then making sure the tread marks are lined up replace it with the new one.
where is bank1 sensor2 on the 1999 Mitsubishi montery sport 3.5
It depends on which sensor, O2/camshaft,etc. The O2 sensor is a straight metal sensor that is screwed into the exhaust. There is an upstream/bank1-sensor1 or down stream/bank1-sensor2 after the catalytic converter. A camshaft sensor is an L shaped, usually black sensor that is installed into the head closest to the firewall(bank1).
Where is camshaft sensor on 2002 Lincoln ls
It is right under the hood i believe, but not too sure.....
Back of the engine, in the exhaust above the catalytic converter.
Coolent temp sensor 2002 Lincoln 3.0 v6
left exauhst pipe behind the Catalitic converter
bank 1 is the passenger side of the engine , sensor 2 is downstream of the catalytic converter ( after the exhaust has passed through the cat. )
how to replace a knock sensor on a 2002 hyundai elantra
how do you replace ambient light sensor on 2002 silverado