0
To reset the maintenance light on a 2003 Acura EL, start by turning the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Then turn the ignition off and back on to complete the reset. The maintenance light should now be turned off.
What else can I help you with?
How do you get maintenance required light off in a 2003 Acura TL?
Not quite sure how to do it manually, but if you spend the extra couple of dollars to go to a Acura dealer they will reset all the warning lights on the vehicle.
How do you reset oil change light on Acura MDX?
To reset "MAINTENANCE REQUIRED" light, turn ignition off, press and hold the SELECT and RESET buttons. Turn ignition and hold buttons for 10 seconds until the indicator resets. works on 2003 mdx for sure.
How do you reset maintenance required light on 2003 Acura RSX?
Put the key in the ignition without turning. Push the odometer/speedometer reset button and keep your finger on it while turning the key on accessories. Wait a few seconds and light should go off.
What does Maintenance required light on mean in 2003 acura tl 3.2?
Time for an oil change
How do you reset the maintenance required light on 2002 Honda element?
You can't reset that light...there is no such thing as a 2002 Honda Element...they didn't come out until 2003.
How do you turn off the maintenance required light on a 2003 Acura TL?
All you have to do is turn the key in the ignition to "power on" (without starting the car) while holding the "reset" and "select" buttons on the instrument panel. Hold for several seconds. the next time you start the car, the maintenance require light will be gone.
How do you reset the maintenance light on 2003 Acura Tl 3.2 type-S?
Key off, hold select button, then turn key on, but don't start engine, wait approximately 15 seconds until maintenance required light stops flashing. Turn key back off. Turn on again without starting if reset is successful maintenance light will only appear once. I had to hold both the select and reset botton. I had to hold both buttons as well. Maybe it is the reset button that needs to be held. I will find out at next service.
How do you reset the maintenance light on 2003 Acura Tl 3.2 type S?
Key off, hold select button, then turn key on, but don't start engine, wait approximately 15 seconds until maintenance required light stops flashing. Turn key back off. Turn on again without starting if reset is successful maintenance light will only appear once. I had to hold both the select and reset botton. I had to hold both buttons as well. Maybe it is the reset button that needs to be held. I will find out at next service.
How do you reset abs light on 2003 Acura MDX?
To reset the ABS light on a 2003 Acura MDX, first ensure that any underlying issues are fixed, as the light indicates a problem with the ABS system. Disconnect the negative battery terminal for about 10-15 minutes to reset the system. Reconnect the battery, and then start the vehicle to check if the ABS light has turned off. If the light remains on, further diagnostics may be needed to address any persistent issues.
How do you reset the maintenance light on 2003 Honda Civic si?
Push and hold the odometer reset button and then turn the ignition switch to the on position but do not start the engine. After around 5 seconds the light will reset.
Resetting maintenance required light on 2003 Honda Element?
To reset the maintenance required light on a 2003 Honda Element, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After this, the maintenance light should turn off. If it doesn’t reset, repeat the process to ensure it's done correctly.
How do you reset the service maintenance indicator light in a 2003 Honda Accord LX?
It will be in the owners manual. Get one from MOTORLIT.COM
