To reset the oil maintenance reminder on a 2006 Toyota Avensis, turn the ignition key to the "ON" position without starting the engine. Press and hold the trip meter reset button on the dashboard, then turn the ignition off. While still holding the trip meter button, turn the ignition back to "ON." Continue holding the button until the display shows "000000" or "OIL," indicating the reset is complete.
maintenance with engine
disconnect the battery
How do you reset the maintenance required light in the 2011Toyota RAV4 with a smart key starting system
To reset the maintenance required light in a 2007 Toyota, first, turn the ignition switch to the "OFF" position. Then, press and hold the trip meter reset button while turning the ignition to the "ON" position (do not start the engine). Continue holding the button until the maintenance light flashes and then turns off. Release the button, and the light should be reset.
How to Reset Maintenance Warning Light on a 2008 Toyota 4Runner
To reset the 'maintenance required' light on a 2012 Toyota RAV4, start by turning the ignition key to the "ON" position without starting the engine. Press the gas pedal slowly three times within five seconds. Then, turn off the ignition. When you start the car again, the maintenance light should be reset.
To reset the maintenance required light on a 2009 Toyota Highlander, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. After doing this, the maintenance light should turn off. If it doesn’t reset, repeat the process to ensure it was done correctly.
Set the multi-information display to TRIP A. Turn the ignition switch off. Press and hold the ODO / TRIP switch, and turn the ignition switch on (IG). After turning the ignition switch on (IG), keep holding the switch for at least 5 seconds.
To reset the maintenance required light on a 2015 Toyota RAV4, first turn the ignition to the "ON" position without starting the engine. Then, press the gas pedal three times within five seconds. Finally, turn off the ignition and start the engine to ensure the light has been reset.
To reset the maintenance required light on a 2010 Toyota Tacoma, start by turning the ignition to the "ON" position without starting the engine. Press the gas pedal three times within five seconds. Turn the ignition off, then start the engine to ensure the light is reset. If the light remains on, repeat the steps.
To reset the maintenance required light on a 2005 Toyota Tundra, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal to the floor three times within five seconds. After doing this, turn the ignition off and then start the engine to check that the light has been reset.
To reset the maintenance required light on a 2017 Toyota Camry, first, turn the ignition to the "ON" position without starting the engine. Then, press the gas pedal three times within five seconds. Finally, turn the ignition off and then back on to ensure the maintenance light has been reset.