First separate the 'button' from the mirror stalk. Now clean the area on window with acetone or lacquer thinner. When it's clean and dry place a drop or two of the adhesive on the button and press it onto the window. Hold it for about 2 minutes then it will be firmly stuck, now slide the mirror stalk over it and tighten it up.
I would use 'Loctite Auto Mirror Adhesive' .
The best adhesive to use for repairing a broken window pane is a clear silicone adhesive.
To dissolve Loctite adhesive, you can use acetone or isopropyl alcohol. These solvents can help break down the bond created by the Loctite glue, making it easier to remove or clean the surfaces. It's important to follow safety instructions and use these solvents in a well-ventilated area.
Most varieties of super glue will work. However, I've found the Loctite version to be best for windows. This is sold as 'Loctite Auto Mirror Adhesive'.
No, 404 isn't toxic after drying.
Remove the 'button' from the mirror stalk and glue it to the window with 'Loctite Auto Mirror Adhesive'. It will stick almost instantly and you can attach the mirror to it in about 5 minutes.
To remove Loctite 401 instant adhesive from clothing, first try scraping off as much of the adhesive as possible with a blunt edge. Then apply a small amount of acetone or nail polish remover to a clean cloth and dab at the adhesive until it starts to lift. Wash the clothing in warm, soapy water afterwards.
Loctite Super Glue is known for its strong bonding capabilities compared to other adhesive products on the market. It forms a durable and reliable bond that is resistant to moisture, heat, and impact.
You remove the 'button' which may be held in with a small Allen screw or a flat spring inside. -Get 'Loctite Auto Mirror adhesive' and re-stick the button to window.
Yes, you can (but there are many cheaper ways of doing it , such as regular tile glue)
Loctite 648 can be loosened by heating it to a temperature of about 240°C (464°F). This temperature allows the adhesive to weaken and break down, making it easier to separate the bonded parts. However, it is important to follow the manufacturer's recommendations for removing Loctite adhesive products safely.
-There is a special product for this, made by 'Loctite' and called 'auto mirror adhesive' -available in auto parts stores