answersLogoWhite

0

An ethernet cable splitter allows one to connect two computers to one cable. First, strip the ooating off the end of the cable wire. Second, untwist the wires inside. Third, connect the wires using an RJ45 connector.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

Can you use any Ethernet cable for Xbox 360?

no, you need to by a crossover Ethernet cable instead of the regular one. the new one will help allot more.


Can you get cat 6 crossover cables?

Yes you can get a crossover cable for any of the Ethernet cable series on one end of the cable two of the smaller cables inside are crossed over so they are not straight through cables


Where can one purchase a crossover Ethernet cable?

Research has shown that crossover ethernet cables are widely available. One can purchase these cables at stores such as Best Buy, Radio Shack and Tiger Direct. One will also find these available online on site such as Amazon and eBay.


Where can you get a 2-port Ethernet switch -- for less than 20 bucks?

What do you mean by "2-port ethernet switch"?You know you can hook two computers directly to each other with a crossover cable. Furthermore, if one of the computers has automatic crossover correction, you can just use a normal cable.


What type of cord is used to connects other computers and peripherals?

The older method was by firewire. Most commonly these days is by USB or using a crossover cable. A crossover cable is basically an Ethernet cable terminated to T568A standards on one end and T568B standards on the other end. For the end user, they make user-friendly software to help configure the connections as well.


What cable use to connect from one router to another router?

There are a few different types of cables that can be used to connect routers, but the most common is the Ethernet cable. This is a cable that has RJ-45 connectors on each end, and it can be used to connect devices that are within 100 meters of each other.


Which type of Category 5 cable is used to make an Ethernet connection between host to host?

A crossover cable can be used to directly connect 2 PCs or other host-type devices. This cable is created by switching the location of the transmit and receive cable pairs in the RJ-45 connector on one end of the cable.


Can two computers communicate by connecting each other using an Ethernet cable back - to - back?

Yes. This can be done with what is known as an Ethernet Crossover Cable. Connecting the NIC of one computer to the other. The cable can be bought or made and a quick search will show you a diagram of how it is wired. Basically the send and receive pairs are reversed on one end so that the send output signal goes directly to the receive input of the other and vice versa.


What is the type of network called that connects two computers directly together using a cross-over network cable?

If both PCs have ethernet cards, the best cable to use would be a crossover cable. A crossover cable is almost the same thing as a regular ethernet cable, except the wires inside the connector are reversed on one end. This reversing of the wires allows you to connect a crossover cable between two PCs without any other network equipment like a switch or a hub.


Which wires get get switched by wiring one end T568A and the other end T568B?

When wiring one end of an Ethernet cable with T568A and the other end with T568B, the wire pairs that get switched are the orange and green pairs. This crossover arrangement is typically used to connect two networking devices directly without the need for a crossover cable.


How do you connect 2 network switches together on the same network?

In the case of ethernet, you need a "crossover" ethernet cable connected between two regular ports or a regular ethernet cable connected to an "uplink port" on one switch and a regular port on the other. Uplink ports are sometimes called "MDI" ports. Both types of cable are available at most computer and office supply stores.


How i should make crossover cable?

I am assuming you have bulk cable available, RJ-45 connectors and a crimping tool. Wire one end of the cable using the T568-A wiring standard, and the other using T568-B. That's your crossover cable.