0
A subnet mask is used in IP networking to divide an IP address into the network and host portions. It consists of 32 bits, typically represented in four octets. Each octet can range from 0 to 255, and when the bits are set to '1' (indicating the network part) and summed across the four octets, they can total up to 255 for each octet. For example, a subnet mask like 255.255.255.0 has three octets set to 255 (all bits '1') and one octet set to 0 (all bits '0'), summing to 255 for each active octet.
What else can I help you with?
If internet protocol is 135.210.195.112 what is the subnet mask?
It depends on whether you are using a default subnet mask or you are subnetting the class B network. A default subnet mask would be 255.255.0.0, but if you are subnetting the last 2 octets in the subnet mask could be anything (up to 255 per octet).
How many bits make up IPV4 subnet mask?
The subnet mask itself is an IP Address so it is also 32 bits
What enables an system to determine which part of an ip address represents the host and which part represents the network?
The subnet mask. The subnet mask consists of a certain number of ones, followed by a certain number of zeroes (in binary). The ones tell you how many bits in an IP address make up the network part; the zeroes are for the host.The subnet mask. The subnet mask consists of a certain number of ones, followed by a certain number of zeroes (in binary). The ones tell you how many bits in an IP address make up the network part; the zeroes are for the host.The subnet mask. The subnet mask consists of a certain number of ones, followed by a certain number of zeroes (in binary). The ones tell you how many bits in an IP address make up the network part; the zeroes are for the host.The subnet mask. The subnet mask consists of a certain number of ones, followed by a certain number of zeroes (in binary). The ones tell you how many bits in an IP address make up the network part; the zeroes are for the host.
What is subnet mask and default gateway?
Subnet mask is a mask used to determine what subnet an IP address belongs to. Default gateway is the gateway in a network that a computer will use to access another network if a gateway is not specified for use.
What subnet mask would a network administrator assign to a network address of 172.30.1.0 if it were possinle to have up to 254?
255.255.255.0
Find external subnet mask?
A simple way of finding out your computer's external subnet mask in Windows is to go to Start and select Run. Type ipconfig into the box, press the Enter key on the keyboard and a dialogue box will pop up with the required information.
How do you find subnet mask?
Get Subnet Mask, IP Address, Gateway etc.For windows users go to START button in bottom left corner then to RUN then type COMMAND in the box - the mini DOS prompt will open in a separate window. Then type ipconfig/all and all the information you desire will be listed - ip address, default gateway, subnet mask etc.......
What subnet mask would a network administrator assign to a network address of 192.30.5.0 if it were possible to have up to 254 hosts?
yes
How can I use IP 172.16.0.0 and 700 subnet?
To use the IP address 172.16.0.0 with a subnet size of 700, you first need to determine the appropriate subnet mask. A subnet size of 700 requires at least 10 bits for host addresses (2^10 = 1024, which accommodates 700 hosts). Therefore, you could use the subnet mask 255.255.255.252 (/22), which allows for up to 1024 addresses. This means you can create subnets such as 172.16.0.0/22, with usable IPs ranging from 172.16.0.1 to 172.16.3.254 for your devices.
What is your subnet address if your ip is89.125.27.81?
The subnet address for this ISP could be almost anything, depending on how the ISP breaks up a larger network pool into a smaller one. The default subnet would be 255.0.0.0, but that is not very likely with an ISP. You can check by using the 'ipconfig' command in Windows to see the subnet mask, or 'ifconfig' if using Linux.
What is the difference between a Network address and Broadcast address?
When you set up a sub network you decide upon the subnet mask and this determines the network address (all zeros in the subnet portion of the address) and the broadcast address (all ones in the subnet portion of the address). When you assign the host addresses in your subnet, then you use the addresses between the network address and the broadcast address.
A class B network has subnet mask of 255.255.230.0 What is the maximum no of hosts per subnet?
Let's break this into binary first:11111111 11111111 11110000 00000000For a class b network, there are 16 bits available (the right 16 numbers). We see that 4 of those have been borrowed already (they have 1's) so we have 12 left.The formula to find the maximum number of hosts is 212 - 2 (the 12 comes from the number above).So, the answer is 4096.----------------------------------------------------------------------------------------------------------------Great binary breakdown explanation!!!However you forgot to subtract 2 decimals to fully apply the formula.(1 Network address, and 1 Broadcast range).So the correct answer is 4094
