0
What else can I help you with?
How many btu's per gallon of Coleman fuel?
Coleman fuel, also known as white gas, contains around 21,000 BTUs per gallon. This makes it a relatively high-energy fuel source for camping stoves and lanterns.
How many Btu's are in a gallon of fuel oil compared to a gallon of propane?
A gallon of fuel oil typically contains about 138,500 BTUs, while a gallon of propane provides approximately 91,500 BTUs. This means that fuel oil has a higher energy content per gallon compared to propane. Therefore, when considering energy output, fuel oil is more efficient in terms of BTUs per gallon.
How many BTUs per gallon of petrol?
About 114,000 BTU per US gallon.
How many BTUs are there in a gallon of Kerosene?
1 gallon for #1 Kerosene produces 135,000 BTUs. #1 Kerosene is closely related to #1 Diesel and JP8 (Jet Fuel) - they differ chiefly in additives. Likewise, #2 Kerosene, Diesel #2, and Furnace Oil are similar to one another. #2 oils have higher sulfur content, which leads to more eye and lung irritation from the emissions. However, they are also comprised of longer hydrocarbon chains, and therefore weigh more per gallon and also have somewhat higher energy content.
How many BTU in 1 gallon of 1 fuel oil?
One gallon of No. 2 fuel oil contains approximately 138,500 British Thermal Units (BTUs). This value can vary slightly depending on the specific composition of the fuel oil, but it is a commonly accepted average for heating calculations.
How many btus in a gallon of biodiesel?
A gallon of biodiesel contains approximately 120,000 to 130,000 British thermal units (BTUs). The exact BTU content can vary slightly depending on the specific composition and feedstock used to produce the biodiesel. Generally, biodiesel has a lower energy content compared to traditional diesel fuel.
How many BTU's per gallon of kerosine?
One gallon of kerosene will produce 134,000 BTUs of energy when burned.
How many BTUs does it take to raise the temperature in a 40 gallon water heater 60 degrees F?
To calculate the BTUs needed to raise the temperature of a 40-gallon water heater by 60 degrees Fahrenheit, you can use the formula: BTUs = gallons × temperature rise × 8.34. For a 40-gallon heater, it would be 40 gallons × 60°F × 8.34 BTU/gallon°F, resulting in approximately 20,016 BTUs. Therefore, it takes about 20,016 BTUs to achieve that temperature increase.
How many BTU of energy in one gallon of liquid petroleum gas?
How many Btus if 1 cubic foot of Liquid Petroleum
How many BTU's per gallon of Fuel Oil?
1 gal of #2 fuel oil (or diesel for that matter) has an equivalent of 115,000 BTUS. I say equivalent because it has a little more than that raw (like 136k or so) but the furnace that burns it is only around 85% efficient, therefore you only get 115K BTUS.
How many BTUs are in a gallon of propane?
Type your answer here... there are around 91,600 BTUs in a gallon of propane. The standard BBQ sized bottle of propane contains 11 pounds of propane. Propane weighs about 4.2 pounds per gallon, so that 11 pounds of propane is about 2.5 gallons in its liquid state. That means there is 91,600 BTUs/Gal times 2.5 gallons so a BBQ sized tank of propane contains about 2.3 million BTUs. If your BBQ has a 50,000 BTU burner, on high heat, it will last a bit over 4 and half hours of run time.
How many BTU to raise 1 gallon of oil one degree?
To raise the temperature of 1 gallon of oil by 1 degree Fahrenheit, it typically requires about 1,800 BTUs. This value can vary slightly depending on the specific type of oil, but 1,800 BTUs is a commonly accepted estimate for heating purposes.
