8 bytes
The UDP (User Datagram Protocol) header contains a total of four fields, which are: source port, destination port, length, and checksum. Each of these fields is 2 bytes long, making the total UDP header size 8 bytes. Unlike some protocols, UDP does not include additional headers like options or flags, keeping it simple and lightweight for fast transmission.
maximum size is 512 bytes without header
UDP is a Transport layer protocol or fourth layer protocol. UDP is a connection less protocol used in transport layer. UDP header have four fields in total .
Both TCP and UDP have origin and destination ports - and that is about all the similarity there is between the two. TCP has several other fields that UDP doesn't have, including window size; a consecutive byte numbering (to figure out where to place a TCP segment in a data stream); the bytes that the other side is expected to send; and others.
14 bytes for the header and 4 bytes for the FCS (Frame Check Sequence) for a total of 18 bytes.
Minimal bytes required in IPv4 header are 20 i.e. 20 bytes are mandatory. And total bytes in IPv4 header are 60.
In the commonly used TCP/IP communications, that would either be a TCP header, or a UDP header.In the commonly used TCP/IP communications, that would either be a TCP header, or a UDP header.In the commonly used TCP/IP communications, that would either be a TCP header, or a UDP header.In the commonly used TCP/IP communications, that would either be a TCP header, or a UDP header.
Did you try Wireshark?
both tcp and udp
The sequence number, acknowledge number, and Window fields.
TCP (Transmission Control Protocol) uses a variable header size that typically ranges from 20 to 60 bytes. The standard header size is 20 bytes, which includes fields such as source and destination ports, sequence number, acknowledgment number, and control flags. Additional options can extend the header size, but the maximum size for a TCP packet, including the header and data, can be up to 65,535 bytes.