Not enough information.
In the SI system the units are litre or cubic meter.
"The average sprinkler will use in excess of 240 gallons of water per hour" also refer to http://www.libertylake.org/water_conservation.htm for watering guide. As a useful gauge: A garden hose with no nozzle attached, will spew out as much as 350 gallons per hour. So 240 sounds about right for a sprinkler system, keeping in mind that it will vary with your local water pressure and type of sprinkler system that you have. If your system has a damaged sprinkler head, you might as well be running that garden hose full blast. My sprinkler system uses 1,000 gallons in a three hour time cycle. I have six or seven zones. I suspect some of my heads are busted, since that sounds about like "garden hose figures." (333 gallons per hour)
Below given list based on a determination specific needs.Wet Fire Sprinkler SystemsDry Pipe SystemsPreaction SystemsDeluge Sprinkler SystemAnti-Freeze Sprinkler System
almost 400 GPM
100
1.32.01hours
A sprinkler system is a device that waters your plants or grass
A sprinkler head plug is used to block off a sprinkler head in a sprinkler system. It is typically used when a sprinkler head needs to be temporarily removed or replaced. The plug prevents water from flowing out of the system through the open hole where the sprinkler head would normally be.
Sprinkler systems can use many components that control the flow of the water. A plastic piping connects the water supply to the electric valves and the sprinkler.
=== === If its a yard sprinkler, no. If its a fire sprinkler, yes.
There is no freon in a home sprinkler system.
The function of the sprinkler system control valve is to regulate the flow of water to the sprinkler system, allowing for the system to be turned on and off as needed to water the designated area.