answersLogoWhite

0

right clicking my computer, selecting properties from the shortcut menu, selecting the hardware tab, and then selecting the device manager button.

User Avatar

Wiki User

11y ago

What else can I help you with?

Related Questions

Windows 9X allows you to see the IRQ assignments?

it is device manager


What Windows utility allows you to directly see the IRQ assignments made to devices?

Device Manager :)))


Which irq does windows server 2003 use for pci steering?

9


What is default irq for com2 and com 4?

The default IRQ for COM2 is typically 3, while for COM4, it is usually 5. These IRQ settings allow the operating system to manage hardware interrupts for the respective serial ports. However, these values can sometimes vary based on the system configuration and settings in the BIOS. Always check your specific system documentation for accurate IRQ assignments.


How many interrupts are supported by windows xp?

16 (sixteen) IRQ 0-15


What does Windows XP configure on Plug and Play peripheral devices?

IRQ I/O address performance level


Why are all your devices using one IRQ in Win2k or WinXP?

Windows 2000 and on used IRQ sharing because the OS would allow more and more hardware. There is a set number of IRQs (15 or 16).


How do you resolve IRQ conflicts?

If you are getting an IRQ conflict after installing a new HW/SW you can see whats wrong by seeing IRQ settings of all the installed devices in the machine. To view your current IRQ (Interrupt Request) assignments in a Windows XP machine you can open Device Manager. Click on Start, click on Control Panel. -> System -> Hardware tab -> Device Manager button -> In Device Manager, select View from the toolbar and then click Resources by Type. Clicking on the Interrupt Request (IRQ) you can find IRQ settings for various devices in the computer. If you see a conflict. You can right click on that device and go to Properties. Under Resources tab you can see the IRQ settings among other properties. Here for a conflicting device you can deselect the Use Automatic Settings option. After this you can select a non-conflicting configuration from the pull down box and save by pressing OK. For some system devices the operating system may not allow you to change the settings.


What IRQ does LPT1 usually use?

LTP1 should use IRQ7.


Where should the complete IRQ list in windows XP be checked?

computer management>>device manager>>view resource by type


What is the IRQ for the floppy disk drive controller?

By default, the IRQ for the floppy disk controller is IRQ 6.


What is the Interrupt Request IRQ assigned to LPT1?

By default IRQ 7 is assigned to LPT1.