Well, they run in sync with the CPU, not the FSB.
SDRAM- Synchronous Dynamic Ram.
Depending on your CPU, you need RAM that is fast enough to keep up with it. SDRAM stores data on the clock ticks of the CPU crystal.
DDRSDRAM (Double Data Rate SDRAM) does the same thing, but also on the spaces between clock ticks.
From Wiki about FSB:
The number of transfers per clock cycle is dependent on the technology used. For example, GTL+ performs 1 transfer/cycle, EV6 2 transfers/cycle, and AGTL+ 4
http://en.wikipedia.org/wiki/Front-side_bus
DDR SDRAM memory modules can be installed at a 333MHz bus speed and operate at that speed. Specifically, DDR400 (PC3200) memory modules typically operate at 333MHz bus speed.
SDRAM
The bus is the communication system between the computers on the vehicle. No bus means that the system has failed. Possible causes include broken wires, bad modules, loose connectors.The bus is the communication system between the computers on the vehicle. No bus means that the system has failed. Possible causes include broken wires, bad modules, loose connectors.
SDRAM or Synchronous dynamic random access memory is unique because it waits for a clock signal before it makes changes which means that is is synchronized with the system bus
The "bus" is the system the computer on the vehicle use to communicate. No bus means that you can't communicate with any of the modules and the modules can't communicate with one another. You either have a bad module or an interruption somewhere in the bus.
The bus is the communication system between computers on the car. No bus means the system is not functioning. Possible causes include fuses, wiring, or any of the modules on the car.
512MHz and 256 MHz
The system consists of CPU, Main Memory, I/O Module, and System Bus.
It is possible. Anything that could cause a computer to quit working can cause a no bus message. The "bus" is the system the computer on the vehicle use to communicate. No bus means that you can't communicate with any of the modules and the modules can't communicate with one another. You either have a bad module or an interruption somewhere in the bus.
Peripheral Wrong dumbo, it is a SERIAL BUS
The 01 Neon use a PCI Bus interface. No bus means that you can't communicate with any of the modules and the modules can't communicate with one another. You either have a bad module or an interuption somewhere in the bus.
The CCD bus is the communication network between modules on the car.