0
What else can I help you with?
What is the default subnet mask for IPv4?
The submask indicates the division between the network id and the host information in an ipV4 address. The default subnet mask indicates the presence of a class A, B, or C based network (the default) without subnetting.
What is the broadcast address on IPv4 networks?
The broadcast address on IPv4 networks is the subnet address, padded on the right with ones. For example, if the subnet address is 192.168.x.y, with a subnet mask of 255.255.0.0, then the broadcast address is 192.168.255.255.
What is the network address of an IPv4 address of 192.168.7.55 with subnet mask 255.255.255.0?
The network address of an IPv4 address of 192.168.7.5 with a subnet mask of 255.255.255.0 would be 192.168.7.0. Remember that the subnet mask determines the network portion of the IP Address.
What piece of addressing information should both the Ipv4 host address and its default gateway share?
The subnet mask; it has to be the same for both units. Also, they have to be on the same network segment.
How many bits make up IPV4 subnet mask?
The subnet mask itself is an IP Address so it is also 32 bits
What is the default subnet mask for the IP address 176.43.52.18?
255.0.0.0 for a class A correct. but why? well, 10.10.0.0 is a class a network and all class "a" networks use a default subnet mask of 255.0.0.0. the range of class "a" networks is 1-126.
What is a subnet mask of ip 75.68.90.175?
The subnet mask would be 255.0.0.0 considering it to be class A address. you can check it by typing the IP address in the wireless network properties of IPv4 in your laptop.
What is the cidr of ipv4 address of 123.54.34.77?
To determine the CIDR (Classless Inter-Domain Routing) notation for the IPv4 address 123.54.34.77, you need to know the subnet mask associated with it. If the subnet mask is not provided, a common default for a public IP address like this would be /24, which indicates that the first 24 bits are used for the network portion. Thus, the CIDR notation could be represented as 123.54.34.77/24. However, the actual CIDR can vary depending on the specific subnetting of the network.
How do you get the subnet of 220.200.190.0 and how do you write it out in binary?
To get the subnet of an IPv4 address you need to know the subnet mask. To write the IP address in binary, simply convert each octet to its binary equivalent and remove the periods (dots). Thus 220.200.190.0 becomes 11011100110010001011111000000000.
What is used to specify which bits of an ipv4 address are used for the network identifier and which bits are used for the host identifier?
Subnet Mask
How do you get your i p address in Windows 7?
Press and hold the Windows start key on the keyboard (just left of the space bar) and press "r". (If you are not sure about this just press start and type "run" and press enter). You should now get the command prompt. Type "ipconfig" do not type the quotation marks > then press enter. You will see IPv4 Address, Subnet Mask and Default Gateway. The IPv4 Address.......... then the number is your IP Address.
Within a classful addressing subnet mask the bits indicate that corresponding bits in an IPv4 address contain network information?
the 1 bits
