i dont know somebody help
The distributor drive gear would be part of the camshaft. The camshaft would have to be replaced.
I have a leak on my drive shaft left front 2000 cheve Blazer I would like to replace the whole unit
The first two floppy drives, if present, are A: and B:. Then, the first active partition on the first hard drive is C: If there is a second physical hard drive, it would be D: ... additional partitions on the hard drives, if active, would get letters after that. The optical drive is normally lettered after the last hard drive partition. So, if you have a computer with 1 floppy, one hard drive with a single partition, and a CD Rom drive, the floppy would be A:, the hard drive would be C:, and the CDRom would be D: In more recent operating systems, however, you can re-arrange drive letters using the storage management tool; but the above is the "normal" arrangement.
Whether or not the hard drive has Windows installed on it is irrelevant to the actual process of replacing the drive. if you want to preserve the current Windows installation, you'll need to use hard drive imaging software to copy the data from the old drive. Otherwise, you can simply replace the drive and reinstall Windows as you would normally.
around $20
struts are a wear and tear item - you can replace one at a time if you mostly drive on the freeway or non performance oriented - if you take your car to the track or drive aggressively around turns then you would like to replace both
Continuing to drive it would probably cause serious damage to the catalytic converter which is a costly part to replace.
If the truck is a 4 wheel drive it would be easier to remove the engine to replace the flywheel. If the truck is a 2 wheel drive removing the transmission and bell housing is the way to go.
i would leave it alone.
I would recommend you have them come to you. They will replace the broken windshield at your home or work place.
The year, 2 or 4 wheel drive and engine info would help.
It would be far cheaper to replace it with a used one than to rebuild the existing one.