answersLogoWhite

0

authentication through RADIUS

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

What two encryption methods are used in wireless networks?

The two common encryption methods used in wireless networks are Wired Equivalent Privacy (WEP) and Wi-Fi Protected Access (WPA/WPA2). WEP was the original standard but is now considered insecure. WPA and WPA2 provide stronger encryption and are widely used to secure modern Wi-Fi networks.


What can be enabled on a wireless network by turning on WEP or WPA?

WEP, WPA, WPA2, etc, are just encryption protocols.WEP is by far the easiest for hackers to break literally in seconds to minutes. WPA is much better but is slowly getting easier to crack, WPA2 Personal is the best you can use now for the consumer. Some fairly older wireless devices may not support WPA2 tho. At the very least use WPA with a long random password if you can't use WPA2.


What are the diferences between wpa and wpa2?

- WPA requires Temporal Key Integrity Protocol (TKIP), and it supports Advanced Encryption System (AES), which provides a stronger encryption - WPA2 requires AES, and it does not support TKIP


Is WPA and WPA2 are secure forms of encryption?

Yes. WEP is easily hackable.


How do you play games on dsi using wpa?

It depends on the game. Most games currently don't support WPA/WPA2. And I agree; I don't know why the game does not follow the configuration setup from the DS itself. So even if you have a DSi that supports WPA/WPA2, if you have a game that does not support it, it won't work.


What are the three main methods of encryption for 802.11 wireless network?

WEP, WPA, and WPA2.


What is 'WPA2' used in connection with?

It is to replaced WPA which requires testing and certification by Wi-Fi alliance. WPA2 is to provide a Wi-fi protection for users, a security technology.


Where is a wep wpa wpa2 located on a belkin router?

It should be Wireless, somewhere in Security for wireless networks.


What is aniwzcs2 service launcher?

It launches subsystems responsible for running your Dlink hardware. Its what enables you to use WPA/WPA2 encrypted networks.


Should implement wireless network will you be concerned about line of sight?

No problem - just use wireless security. (WEP WPA or WPA2)


Why does your dsi ask you a security key is needed to connect to this access point enter the security key then tap ok and What is the security key?

The security key is the password for the wireless router. It'll show up if the wireless encryption is : WEP WPA-PSK (TKIP) WPA2-PSK(TKIP) WPA-PSK (AES) WPA2-PSK (AES).


What year did the WPA2 start?

WPA2, or Wi-Fi Protected Access 2, was introduced in 2004 as a security protocol for wireless networks. It was developed to enhance the security of wireless networks by implementing stronger encryption methods compared to its predecessor, WPA. WPA2 became mandatory for Wi-Fi certification in 2006.