0
What else can I help you with?
What is the length in bits of a logical IP address IPv4 and IPv6?
32 bits (for IPv4), or 128 bits (for IPv6).32 bits (for IPv4), or 128 bits (for IPv6).32 bits (for IPv4), or 128 bits (for IPv6).32 bits (for IPv4), or 128 bits (for IPv6).
Which characteristic describes an IPv6 enhancement over IPv4?
While IPv6 is based on IPv4, it is superior. The main characteristic that shows its enhancement over IPv4 is that it processes faster.
Should ipv4 be disabled when using ipv6?
There is no need to disable ipv4 to use ipv6.
Differential between ipv4 and ipv6?
1. Describe the main features that differentiate IPv6 from IPv4
How much overhead would this be if IPv6 is tunnelled over IPv4?
When tunneling IPv6 over IPv4, the overhead primarily consists of the additional IPv4 header and any encapsulation overhead. An IPv4 header is typically 20 bytes, while an IPv6 header is 40 bytes. Thus, the total overhead for tunneling one IPv6 packet over IPv4 would be 20 bytes, resulting in a total packet size increase of 20 bytes for every IPv6 packet transmitted. This additional overhead may impact performance, especially in networks with high traffic or limited bandwidth.
What is a service that provides IPv6 connectivity to IPv4 users?
There are a number of technologies that can provide IPv6 translation for IPv4 users, most commonly Dual Stack and 6 to 4 tunneling. DUAL STACK involves running both IPv4 and IPv6 on a single router with the router managing the implementation of either protocol as and when necessary. 6 to 4 tunneling encapsulates an IPv6 frame in and IPv4 frame for tansport over an IPv4 network either to its destination address or a network where the IPv4 frame can be discarded.
Which IPv4 to IPv6 transition methods allows an IPv4 only host to communicate with a IPv6 only host?
I guess NAT64
Which network migration technique encapsulates IPv6 packets inside IPv4 packets to carry them over IPv4 network infrastructures?
tunneling
What are the loopback addresses in IPv4 and IPv6?
In IPv4, the loopback address is 127.0.0.1. In IPv6 it is ::1.
Conversion of IPV4-IPV6?
There is no direct conversion.
Discuss the IPv6 integration issue and comparing the security aspects of IPv4 and IPv6?
uLol(^^,)!
Which statements about IPv4 and IPv6 are correct?
IPV6 is less vulnerable to DNS Spoofing IPv4 addresses use 32 bit or 4 bytes for addressing IPv6 addresses use eight bit segments.
