A multiplexing design can be used for a wide variety of applications.
Computers:
Networking, FireWire, USB, SATA, E-SATA, SPDIF, S-Vid, All utilizes different forms of multiplexing in order to carry a lot of information on very few wires. This makes connecting of these devices very easy.
Stereo systems:
CD-Players utilizes multiplexing in order to transfer data/music digitally to a digital input.
Multiplexing of digital signals ensures less to no loss of quality in the transfer.
Amplifiers with digital output. Any sound system with digital output utilizes multiplexing. This makes it easily possible to carry 6 channels of sound in only one fiber cable.
General:
Multiplexing is often utilized over large distances. It may be of interest to measure the temperature 6 kilometers (4 miles) down into an oil drill hole or other. Temperature can easily be converted into an electrical voltage but this voltage will be changing on its way up to surface due to capacitive loads and interference. The result may give a very wrong readout of temperature. By multiplexing signal, we can transfer digital data instead. Digital data are then interpreted via a de-multiplexer and we get an accurate result every time.
Speed of multiplexing decreases over distance. The farther away, the slower speed.
uses of a multiplexer correctly
The use of Multiplexer is becoming a common technology equipment. What should pay attention to when use Multiplexer? This article show the details of using multiplexer:http://www.ingellen.com/blog/the-use-of-multiplexer.html
types of multiplexers?
Data multiplexers came in two types: time division multiplexers (TDM) and statistical multiplexers (statmux)
32 multiplexers , each of size is 16 bits
sometimes we want to select one of two input nibbles,In this case we use nibble multiplexers.
15 2 bit multiplexers
Data multiplexers were employed to collect data from multiple stations and create a single, high-speed bit stream
yes you can
Statmux is short for statistical multiplexers
The use of digital multiplexers is mainly on increasing the amount of data that a network can receive on a certain bandwidth and time. It is also called the data selector.
i want to get the answer of this ?
7
Multiplexer is a device that will select one input and put it through. De- multiplexers will take one signal and broadcast to many devices. Encoder will take a signal and code it with information specific to an application. Decoder will extract the encoded signal to restore in its original form