0
USB - connects to devices such as printers, external hard-drives etc.
3.5mm sockets - for connecting speakers, microphone or a head-set.
HDMI - for playing back High-definition content on the computer.
9-pin D - for video output ot a monitor.
What else can I help you with?
Instrument panel fuses vauxhall corsa?
No fuses on instrument panel. Any panel problems are due to faulty connections on the multi-pin plug on the back of the instrument console. Very common fault. I've fixed loads of these.
How do you change four wheel drive switch in gmc Yukon located in dash?
well i just did it!take off your dash trim witch will reveal your 4x4 panel switch.disconnect the wire connections in back of the 4x4 panel switch.plug in the wires connections to the back of your knew 4x4 panel switchand carefully put your dash trim back on!
How can you make your PC stop receiving commands by another PC in your network?
Plug out the network cable in the back, or disable the network adapter from the network connections panel.
What is the purpose of the sub panel ground and neutral connections in an electrical system?
The purpose of the sub panel ground and neutral connections in an electrical system is to provide a safe path for electrical currents to flow back to the main panel and prevent the risk of electric shock or fire hazards. The ground connection is for safety, while the neutral connection is for completing the circuit and ensuring proper functioning of the electrical system.
How do you get a palm treo back off?
With the back panel facing you so you can read the word Palm, press the lower-right corner of the back panel with your right thumb to release the panel. Remove the panel.
Why is your dsl alarm ringing in your 94 Lincoln continental?
try cleaning the contacts on the back of the panel, in order to do this you have to take off the front itself and with a toothpick clean the connections. this should solve your challenge.
What would cause interior lights in my jeep to flicker?
Fuse connections. The connectors for the dome light in the fuse panel get loose, you can try and bend them back with a small screwdriver to make the connection again.
How do you change a power window motor on a Mercedes 300e?
Take off the door panel-unsrew all the screws. Lift up on the panel. It pops right off.. Unplug any electrical connections.. set aside. Peel back the vapor barrier. Remove the motor.
How can you get your computer off a network?
Pull the Ethernet cable out of the back of the unit is the easiest solution. Either that or disable the Local Area Connection through "Network Connections" (Accessed through control panel in Windows).
What does it mean when the temperature gage has two bars on top and two bars on bottom on a 1991 Lincoln continental?
usually the DCL is beeping which means communication challenges, clean the DCL connections on the back of the panel.
What could be wrong with your digital milage counter in my 2002 ford explorer?
mileage counteron the back of the instrument panel is a cicuit board. the counter is soldered in it. it's probably burnt on one of it,s connections.
Sending unit is not working no fuel 1992 Volvo 940 gle?
This is a common problem with the instrument cluster connections on the back of the cluster itself. The contacts need to be resoldered. Remove the cluster, and use a solder iron to heat and reflow the solder connections.
