ready
busy
sleep
A usb cable is not a device. A USB drive would be a Storage Device and still not be an Input or Output device. A USB keyboard would be an input device and a USB printer would be an output device.
The USB 2.0 and 3.0 device will work. USB 3.0 is backwards compatible with USB 2.0.
They work with any computer that has a USB port, to a USB device.
A usb cable is not a device. A USB drive would be a Storage Device and still not be an Input or Output device. A USB keyboard would be an input device and a USB printer would be an output device.
Check that the usb device is functional in the Device Manager, Some USB devices don't appear in Device Manager use the utility program that came bundled with the device to check for errors. No. Plug the device into another USB port. If it does not work after you have plugged it into all USB ports on the computer then you know that your device is not working.
Try running a diagnostic scan on the USB device, this will probably only work with a Mass Storage Device, however, and you may need to take the device to a computer specialist store.
First try moving the device to another USB port!!! Check that the usb device is functional in the Device Manager. some USB devices don't appear in Device Manager use the utility program that came bundled with the device to check for errors.
USB 3.0 Extensions are backward compatible. USB 3.0 Device cables are not.
The USB root device could be disabled in the Computer Hardware Device.
Plug two or three devices into that port if none of them work the port is defective.
USB Ports on the front of a computer for convenience to allow someone to easily connect and remove a portable usb device such as a usb flash drive or other device that you may sit down ad connect for a few minutes then remove to take with you.
To enable USB storage mode on your device, connect your device to a computer using a USB cable. Then, go to the settings on your device and look for the option to enable USB storage mode or file transfer mode. Select this option to allow your device to be recognized as a storage device on the computer.