0
What command would you issue from the command prompt to test whether your computer has connectivity to the network?
To test whether your computer has connectivity to the network, you can use the ping command followed by a known IP address or domain name. For example, you can type ping 8.8.8.8 (which is a Google DNS server) or ping www.google.com in the command prompt. This command sends packets to the specified address and displays the response time, indicating whether the network connection is functioning properly. If you receive replies, your computer is connected to the network; if not, there may be connectivity issues.
What else can I help you with?
What command do you use to determine whether you can reach another computer on the local network?
"ping" will test for connectivity to a device at the Ethernet Address Level...but that does not mean the device's software is actually talking to the network or responding to the network. "ping" WILL tell you the device is wired up and has power applied to it's network interface board.
What is used to identify whether a remote computer is on the same network or a remote network?
check the ip of the remote computer and yours, use ipconfig command
When a computer sends a frame to another computer do other computers on that network receive the frame?
That would depend on the network topology chosen and the type of network connectivity devices employed. In a properly constructed, switched and/or routed network the answer would be NO. If hubs or repeaters are used to connect devices and/or network segments, then yes. In a bus or ring topology, the answer is yes. Whether anything is done with the frame is a different matter and depends on whether you consider the network adaptor to be integral to the computer.
Which network connectivity device is used at the client side?
It is a network adapter whether it is wireless or wired type.
Where do use a ping command?
It allows you to see whether a certain point in the network can be reached, or not.It allows you to see whether a certain point in the network can be reached, or not.It allows you to see whether a certain point in the network can be reached, or not.It allows you to see whether a certain point in the network can be reached, or not.
What is the network setting that affects whether your computer can see other computers and devices on the network and whether other computers on the network can see your computer?
The subnet mask and the default gateway.
Which part of a network interface card identifies whether or not there is basic connectivity from the station to a hub or a switch?
Link light
How can you tell whether the printer has been shared?
To check whether a printer is shared or not go to devices on the computer and note whether the printer is listed for that particular computer. Do this for each computer in question.
What would you ping to determine whether TCPIP was functioning property your on computer?
To determine whether TCP/IP is functioning properly on your computer, you can ping a reliable external IP address, such as Google's public DNS server at 8.8.8.8. Open a command prompt or terminal and type ping 8.8.8.8. If you receive replies, it indicates that TCP/IP is functioning correctly and your internet connection is active. Additionally, you can ping a local IP address, like your router's address, to check local network connectivity.
What is used to determine whether a remote computer is on the same network or a remote network?
subnet mask
Which command does the network administrator use to determine whether inter-V LAN communication is functioning?
Ping
What computer network tool is used to test whether a particular host is reachable across an IP network?
Ping
