To provide an accurate answer, I would need to see the specific context or content of the highlighted octets you're referring to. Please provide the octets or additional details, and I'll be happy to help!
Leading two octets of message digest: L, To enable the recipient to determine if the correct public key (k(A) e ) was used to decrypt the message digest for authentication, by comparing this plaintext copy of the first two octets with the first two octets of the decrypted digest. These octets also serve as a 16-bit frame-check sequence for the message, for authentication and error detection.
The IP address 131.194.192.3 falls within Class B. Class B addresses range from 128.0.0.0 to 191.255.255.255 and are typically used for medium to large networks. In this class, the first two octets (131.194) are used for the network portion, while the last two octets represent the host portion.
The IP address 150.0.0.0 is part of the Class B range of IP addresses, which spans from 128.0.0.0 to 191.255.255.255. In this specific address, the first two octets (150.0) indicate the network portion, while the last two octets (0.0) represent the host portion. This means that it can accommodate a large number of hosts within the 150.0.0.0 network.
Since a subnet mask is used to separate the network id from the host id, any 1 bits indicate the network portion and the 0 bits indicate host portion. As an example, in the subnet mask: 255.255.0.0 This indicates the first two octets are used for the network, and the last two octets (ipV4) are used for host portion of an address.
change last two letters around collapse
The first two octets of APIPA (Automatic Private IP Addressing) are 169.254. This range is used for automatic addressing when a device cannot obtain an IP address from a DHCP server. The full range of APIPA addresses is from 169.254.0.1 to 169.254.255.254.
Class B addresses allow for more than 1,000 hosts per network. In Class B, the first two octets are used for the network portion, and the last two octets are used for hosts, allowing for up to 65,534 hosts per network (2^16 - 2). This makes Class B suitable for medium to large networks.
This appears to be the word popular with the last two consonants transposed.
A class B address range is all the addresses that start with binary 10, or decimal 128-192. As originally defined, the first two bytes (octets) indicate the network; the last two bytes are reserved for the host. That is, a class B network has about 65,000 available addresses.
Thirty Two bits in four eight bit octets.
Zwei is how you spell two in German.
I've seen it both ways. Generally, if it's a first name, one s. If it's a last name, two.