10.35.88.12How could the default gateway be the workstations IP address? the default gateway would be the first available IP address in this case 10.35.88.1 it would have to go through your default gateway to get to his default gateway and be sent to his workstation.
ip default gateway
The default gateway for the IP address 10.0.0.30 is typically the IP address of the router that connects the local network to other networks, such as the internet. In a subnet with the IP range 10.0.0.0/24, a common default gateway could be 10.0.0.1. However, the exact default gateway can vary based on the specific network configuration. To determine the default gateway for a specific device, you can check its network settings or consult the network administrator.
Yes. You need to have an IP (either static or dynamic) You must have a subnet mask that corresponds to the IP address; and a gateway IP address that is on the same subnet.
Yes, that is what the default gateway is used for.
To change the gateway address in UNIX, you can use the route command. For example, you can set the default gateway with the command route add default gw <new_gateway_ip>. Alternatively, you can use the ip command with ip route add default via <new_gateway_ip>. Make sure to replace <new_gateway_ip> with the actual IP address of the new gateway.
MAXAMUUD (QOJE, FARASKA SOOL)different between gateway and default gateway gateway is converter of your network and default gateway is In computer networking, a gatewayis a node (a router) on a TCP/IP network that serves as an access point to another network. A default gateway is the node on the computer network that the network software uses when an IP address does not match any other routes in the routing table.
Ping the default gateway IP address to know if it is reachable
What is the default subnet mask for an IP address of 198.133.219.4?
The "default gateway" is your router.
You default gateway's IP address.
IPCONFIG. Then look under 'Default Gateway' for your IP address.