0
What else can I help you with?
Why are you charged using DHCP server in LAN?
Usually nothing, today all routers have a DHCP server included.
What three things must be included in a DHCP scope?
IP, Subnet, and gateway
What step is this dhcp discovery dhcp offer dhcp request dhcp acknowledge?
Those are the four phases of acquiring an IP address via DHCP. More information would be needed to indicate which of the 4 phases are being used at this point.
Where can one get information about configuring a DHCP server?
One can get information about configuring a DHCP server online in the following websites: Wikipedia, Microsoft or FreeBSD. One should carefully read the information, since an incorrectly configured DHCP server can mean the loss of Internet connection.
In a domain installations of DHCP require the authorization of the dhcp server before IP addresses can be allocated True or False?
yes DHCP require the authorization of the dhcp server before IP addresses can be allocated because until we authorize DHCP server the network does not know who is the dhcp server for the subnet. The DHCP server broadcasts the information to all.
What is DHCP scope and why it is required?
DHCP Gives four piece of information that are required in a network today. The four piece of information are IP address of computer , IP address of router , Subnet mask and IP address of name server. DHCP is a dynamic host configuration protocol and is backward compatible with BootP.
What is dhcp scope and why is it required?
DHCP Gives four piece of information that are required in a network today. The four piece of information are IP address of computer , IP address of router , Subnet mask and IP address of name server. DHCP is a dynamic host configuration protocol and is backward compatible with BootP.
What command enables you to refresh DHCP lease information?
To refresh DHCP lease information on a Windows system, you can use the command ipconfig /release followed by ipconfig /renew in the Command Prompt. The first command releases the current DHCP lease, while the second command requests a new lease from the DHCP server. On Linux systems, you can use dhclient -r to release and dhclient to renew the lease.
How do you configure DHCP in Linux operating system?
DHCP support is already included in every distro capable of networking. It isn't a program; it's a basic part of the TCP/IP protocol.Answer:Well, if you are referring to the DHCP client, the program /sbin/dhclient is likely already installed on your Linux distro of choice.If you would like to run a DHCP server for one or more DHCP client machines or devices, you would go to www.isc.org and download the dhcp.x.x.x package (whatever the latest and greatest version is) and compile it on your Linux host machine. After compilation, configure it as desired, launch dhcpd (usually via the service command or directly from /etc/init.d), the DHCP daemon and you're ready to boot your DHCP clients.
What ports are used by dhcp and the DHCP client?
The port 67 and port 68 are used by DHCP and the DHCP clients.
Which type of server gives host computers IP configuration information?
It's DHCP
What is dhcpack?
DHCPACK is a confirmation for the acceptance of the DHCPOFFER from the Client. DHCP Server Sends DHCPACK in response to DHCPREQUEST to renew the lease time or to confirm the allocated IP address. DHCPACK is a confirmation for the acceptance of the DHCPOFFER from the Client. DHCP Server Sends DHCPACK in response to DHCPREQUEST to renew the lease time or to confirm the allocated IP address.
