answersLogoWhite

0

What else can I help you with?

Related Questions

List interrupts used with the IBM PC type sytems?

IRQ 0 - System timer. IRQ 1 - Keyboard. IRQ 2 - Cascaded signals from IRQs 8-15. IRQ 3 - COM2 (Default) and COM4 (User) serial ports IRQ 4 - COM1 (Default) and COM3 (User) serial ports IRQ 5 - LPT2 Parallel Port 2 or sound card IRQ 6 - Floppy disk controller IRQ 7 - LPT1 Parallel Port 1 or sound card (8-bit Sound Blaster and compatibles) IRQ 8 - Real time clock IRQ 9 - Free / Open interrupt / Available / SCSI. Any devices configured to use IRQ 2 will actually be using IRQ 9. IRQ 10 - Free IRQ 11 - Free IRQ 12 - PS/2 connector Mouse. IRQ 13 - ISA / Math Co-Processor IRQ 14 - Primary IDE. If no Primary IDE this can be changed IRQ 15 - Secondary IDE These are just a set of standard IRQs. For much more detail check our Ralf Brown's list located at http://www.cs.cmu.edu/~ralf/files.html


Which two IRQ settings are connected together?

IRQ Ports 2 & 9 -Taylor


If IRQ 2 is in use IRQ 9 cant be used?

Depends if it's sharable or not. You could try moving the card to another slot.


If PCI attempts to use an IRQ that is used by a legacy ISA devicehow can you force PCI to IRQ?

In the context of computer systems, IRQ (Interrupt Request) lines are used by hardware devices to communicate with the CPU. However, there might be instances where you'd prefer certain devices not to use IRQs. If you wish to prevent a PCI (Peripheral Component Interconnect) device from using an IRQ, you generally have to go through the system's BIOS (Basic Input Output System) settings. The BIOS interface varies among manufacturers, but usually, you can access it by pressing a specific key (like F2, F10, or Del) during the system startup. Once in the BIOS settings, look for options related to IRQ assignments for PCI devices. This setting might be under different menus based on the specific BIOS version. Once located, you can change the IRQ settings to manual and then disable the IRQ for the specific PCI slot. Remember that changing BIOS settings should be performed with caution, as incorrect configurations can lead to system instability. Always ensure you understand what each setting does before making adjustments. Also, refer to your motherboard's manual for specific instructions.


Which irq does windows server 2003 use for pci steering?

9


Which IRQ's can you assign to a NIC without causing a conflict with preassigned devices?

9 and 11 9 and 11 Try IRQ9 and IRQ10. IRQ 9, 10, and 11 have no default assignment (Chap 6 Network+ Guide to Networks)Read more: Which_two_irq's_can_you_assign_to_a_NIC_without_causing_a_conflict_with_preassigned_devices


What is rst 5.5 in 8085?

RST 5.5 is an interrupt request pin (pin 9) on the 8085. It is sampled, along with other interrupt requests, one clock cycle before ALE on the falling edge of CLK. When enabled, and having priority, it causes an interrupt vector sequence using the RST 5.5 instruction, going to location 002CH.


9-letter word for interrupt?

Interject.


Which IRQ could you probably assign to a NIC without causing a conflict?

9, 10 and 11


Which interrupt is cascaded to provide interrupts 9 through 15?

2


3 Which two What IRQs could you probably assign to a Nic without causing a conflict with preassigned device?

9 and 11 9 and 11 Try IRQ9 and IRQ10. IRQ 9, 10, and 11 have no default assignment (Chap 6 Network+ Guide to Networks)Read more: Which_two_irq's_can_you_assign_to_a_NIC_without_causing_a_conflict_with_preassigned_devices


What are the release dates for Total Request Live - 1998 1999-08-09?

Total Request Live - 1998 1999-08-09 was released on: USA: 9 August 1999 USA: 9 August 1999 USA: 9 August 1999