0
What else can I help you with?
How many ports are there in Cabletron Ethernet Bridge/Router Interface Module BRIM-E6 ?
It is a six port ethernet bridge with six computer capability networking.
What is the main function of the Cisco Linksys WET54G Wireless G Ethernet Bridge?
The purpose of an ethernet bridge is to link two networks together. This particular model of bridge can be purchased at Staples, Walmart, or online at Amazon.
Bridge and Router: Extending a Network?
Anyone who wants to expand a wireless home network can do so with a bridge. Most wireless routers have four Ethernet ports, so this limits the amount of devices which could be connected through cables. A network bridge is a networking accessory which has Ethernet ports for compatible devices. The bridge can be connected to an existing router through Ethernet cables or wireless methods. The bottom line is that a network bridge ultimately links additional Ethernet ready devices to a router that can only physically support four Ethernet connections. A network bridge is similar to a USB hub in that it extends the number of possible connections.
Where can one buy as Linksys wet11 wireless Ethernet bridge?
There are a few retailers in which one can buy a Linksys wet11 wireless Ethernet bridge. Amazon, Walmart, Best Buy are some retailers who carry such products.
What's the different between an Ethernet bridge and a switch?
The difference between an ethernet bridge and a switch is that the bridge only has two ports, while the switch has multiple ports. When there is a lot of traffic going through the ports, the bridge traffic may get tied up or crash often because there are only 2 ports for information to travel back and forth.
Is there any way to get wireless internet on a 20 gigabyte PS3?
Yes with a wireless router and connect the PS3 by the ethernet port to a wireless ethernet bridge. see related link
Does Cabletron Ethernet Bridge/Router Interface Module BRIM-E6 have USB ?
Yes it actually has two USB ports that are available on either side of the bridge.
Which type of bridge would be used to connect an ethernet segment with a token ring segment?
You will need a router. Token Ring and Ethernet refer to two different layer two protocols. You will need a layer three device to encapsulate the data for communication between the two networks. A bridge refers to a layer two device.
How do Bridge Connections?
It is when the ethernet is configured to link the ip and then get a bridged connection. A bridge also rejuvenates the data packets sent over a network as they can deteriorate over long distances.
Wi-Fi bridge to Ethernet?
A Wi-Fi bridge is essentially a receiver for a Wi-Fi signal (i.e. connection) originating from a Wi-Fi hotspot (i.e Wi-Fi router) that it splits (or shares) with a number of units (e.g. desktops, printers) to which it is wired by ethernet cables. The Wi-Fi bridge itself is connected to the hotspot by a wireless signal and not by an ethernet cable. So the word "bridge" in its name means that it serves as a "link" between two or more networks within which individual components are wired together by ethernet cables. An important consideration is that the use of a Wi-Fi bridge makes it possible to share a single MAC address among a number of clients (e.g. individual computers, printers) for connecting to one IP (i.e. internet provider)
How do you get a xbox 360 ethernet cable to get your ip when the computer your running it off of has wirless?
you have to bridge the connections. go to your network connections and highlight the wireless and the lan and right-click and select bridge and it should work.
How does a bridge device improve performance on an Ethernet network?
how does each device work? what are the advantages of each? 1.switch 2.hub 3.bridge
