hard disk
Yes, SATA II (SATA 3 Gb/s) devices are backward compatible with SATA I (SATA 1.5 Gb/s) interfaces. This means that you can connect a SATA II hard drive or SSD to a SATA I motherboard, but the drive will operate at the lower SATA I speed. However, if you connect a SATA I drive to a SATA II interface, it will run at the SATA I speed as well.
It wouldn't be a SATA motherboard if you couldn't connect SATA drives to it.
No. IDE Hard Drive cannot be replaced with a Sata Hard Drive because the connectors are different. example. if you have sata hard drive installed on your machine. and you purchase IDE Hard drive. you won't be able to install the IDE hard drive where the Sata hard drive was because the IDE connectors are a different shape and size towards the Sata hard drive connectors.
The Sata II is has a transfer speed that is two times as fast as the original Sata. The Sata has a communication speed of 1.5 Gbit/s while the Sata II is 3.0 Gbit/s.
SATA 3 is backwards compatible, it means you connect it the same way as SATA 1.
Ø SATA I- 1.5 Gb/sec, SATA II- 3 Gb/sec and SATA III- 6 Gb/sec
Its faster
Ø SATA I- 1.5 Gb/sec, SATA II- 3 Gb/sec and SATA III- 6 Gb/sec
SATA power cables can be purchased from a number of retail locations and online stores. Walmart, Best Buy, Staples, Office Depot, and Amazon, for example, each sell this item.
Speed of sata 1 is 1.5 Gbps Speed of sata 2 is 3 Gbps
SATA power connector is a type of power cable with which we can provide Disks power from the mother board. SATA Power cables are connected from sata point on motherboard to the drive.
Yes, SATA is real.