One meaning of "key lock switch" is a switch that requires a physical key to turn. Many computers come with such switches installed. They cannot be turned on or turned off except by persons who have the key.
Another meaning is switch that can enable or block traffic from a keyboard. When the switch is thrown, the keyboard becomes inert. In some cases it can be set up like a screen-lock, where a password must be inserted or a physical key inserted in order to enable the keyboard.
no
To remove the ignition switch key lock on a 1989 Jeep Wagoneer, first disconnect the battery to ensure safety. Then, remove the steering column cover to access the ignition switch. Locate the retaining screw or pin on the ignition lock cylinder, turn the key to the "run" position, and press the pin or screw to release the lock cylinder. Finally, pull the key lock out of the ignition switch.
Press the off switch button and go to key lock
there is a lock out switch on the actual latch witch locks out key
The new key lock is not physically cutting off the actual switch. Was this he original problem that caused replacement of the key set? Maybe you installed the new lock improperly or he shaft to the switch or switch has a problem.
Yes. The lock cylinder is metal part that the key goes into. The ignition switch houses the lock cylinder.
change the Ignition Lock lock switch
Most likely your steering wheel is in the lock mode. If it is, then unlock it and your key will work properly.
u caint it has a lock on the steerin wheel that prevents theft...switch the ignition out and use a new key...the lock is undone as soon as ur key turns
On the colum strait across from the key lock.
Replace your ignition lock assembly.
disconnect the battery.put the key in the switch,and turn to the acc position.(on) insert a piece of wire into the hole of the lock cyclinder.push the wire inward to depress the the lock pin,then turn the key counter clock wise and with draw the lock cyclinder.press the rear of the switch and rotate it counter clockwise. remove the bezel,switch and spacer.hope this helps.