0
What else can I help you with?
What is memory word size required in an 8085 system?
In an 8085 system, the memory word size required is 8 bits. This means that each memory location can store 8 bits or one byte of data. The 8085 processor accesses memory locations using these 8-bit memory addresses to read or write data during program execution. The memory word size of 8 bits allows the 8085 system to handle data in small, manageable chunks efficiently.
Difference between direct addressing mode and indirect addressing mode in detail?
Direct addressing mode means the operand address is contained in the instruction. In the 8085, an example is LDA 1234H, which loads the accumulator with the contents of memory location 1234H. In the 8086/8088, an example is MOV AL,[1234H], which accomplishes nearly the same thing.Indirect addressing mode means the operand address is contained in a register. In the 8085, an example is LDAX B, which loads the accumulator with the contents of the memory location specified in register BC. In the 8086/8088, an example is MOV AL,[BX], which accomplishes nearly the same thing.
According to word size how many instruction in 8085?
The 8085 is an 8 bit processor, so its word length is 8 bits.
How do you debbug out of memory?
A: THE WORD DEBUG was used in ancient teletype where actually bugs get into it. BY addressing a block of memory and expect a certain results can be used to zero into a bad chip
How can you use the word capability in a sentence?
I have the capability to answer this question
Types of instruction format of 8085?
The 8085 instruction set is classified into three groups according to its Word size. They are 1. One word /1 byte instructions 2. Two word / 2 byte instructions 3. Three word / 3 byte instructions
How do you xxplain the types of memories?
Each instruction of a computer specifies an operation on certain data. The are various ways of specifying address of the data to be operated on. These different ways of specifying data are called the addressing modes. The most common addressing modes are:Immediate addressing modeDirect addressing modeIndirect addressing modeRegister addressing modeRegister indirect addressing modeDisplacement addressing modeStack addressing modeTo specify the addressing mode of an instruction several methods are used. Most often used are :a) Different operands will use different addressing modes.b) One or more bits in the instruction format can be used as mode field. The value of the mode field determines which addressing mode is to be used.The effective address will be either main memory address of a register.Immediate Addressing:This is the simplest form of addressing. Here, the operand is given in the instruction itself. This mode is used to define a constant or set initial values of variables. The advantage of this mode is that no memory reference other than instruction fetch is required to obtain operand. The disadvantage is that the size of the number is limited to the size of the address field, which most instruction sets is small compared to word length.INSTRUCTIONOPERANDDirect Addressing:In direct addressing mode, effective address of the operand is given in the address field of the instruction. It requires one memory reference to read the operand from the given location and provides only a limited address space. Length of the address field is usually less than the word length.Ex : Move P, Ro, Add Q, Ro P and Q are the address of operand.Indirect Addressing:Indirect addressing mode, the address field of the instruction refers to the address of a word in memory, which in turn contains the full length address of the operand. The advantage of this mode is that for the word length of N, an address space of 2N can be addressed. He disadvantage is that instruction execution requires two memory reference to fetch the operand Multilevel or cascaded indirect addressing can also be used.Register Addressing:Register addressing mode is similar to direct addressing. The only difference is that the address field of the instruction refers to a register rather than a memory location 3 or 4 bits are used as address field to reference 8 to 16 generate purpose registers. The advantages of register addressing are Small address field is needed in the instruction.
What is English of the word auqat?
Capability
Can you give a sentence with the words capable and capability?
Are you capable of creating a sentence with the word capability.
How many references are needed for each type of instruction to bring an operand into a processor?
Indirect addressing needs 2 reference to memory
How do the instruction of 8085 is classified based on their function and word length?
The 8085 instruction set is classified into the following three groups according to word size: 1. One-word or 1-byte instructions 2. Two-word or 2-byte instructions 3. Three-word or 3-byte instructions
What is past word for addressing?
ADDRESSED!
