The subnet mask within the TCP/IP configuration is used to distinguish the ? from the host address.
True
The subnet mask for the IP address 10.0.0.138 typically depends on the network configuration. In a default Class A configuration, the subnet mask would be 255.0.0.0, which corresponds to a /8 prefix. However, the actual subnet mask can vary based on specific network needs and can be configured to something like 255.255.255.0 (a /24 prefix) or others depending on how the network is structured.
DNS sever, Default Gateway, Subnet Mask, TCP/IP Address.
Subnet mask
DHCP Dynamic Host Configuration Protocal
Any device (mac or not) receives its subnet mask from the DHCP service, or by manually configuring the interface. In the case of manual configuration you would need to check with your network administrator to find out the correct setting for the subnet mask.
131.108.16.65
network address wildcard mask area ID
hi how to find network configuration if remote machine having window operating system
The IP address 192.168.1.0 with a subnet mask of 255.255.255.0 (or /24) indicates a Class C network. This subnet allows for 256 IP addresses, ranging from 192.168.1.0 to 192.168.1.255, where 192.168.1.0 is the network address and 192.168.1.255 is the broadcast address. This configuration provides 254 usable host addresses (from 192.168.1.1 to 192.168.1.254) for devices within the network.
The red stripes on Jason Voorhees' mask, particularly in the "Friday the 13th" series, are often associated with his character's violent and vengeful nature. They serve to distinguish his mask from others and symbolize the bloodshed linked to his actions. The mask itself has become an iconic representation of horror in popular culture, with the stripes adding to its menacing aesthetic.
Yes, it must be on the same network segment or you won't be able to route a packet outside of your network segment. --- In simple home networks, the default gateway will be within the scope of the subnet mask. Some devices will enforce this (artificial) requirement. But it's entirely possible to engineer a network with a gateway that is not within the scope of the subnet mask (if the device will allow it). Image two logical networks that run on the same physical network. It's just not a common configuration.