0
What else can I help you with?
What is the ATA standard that changed the number of bits used to address data on a hard drive?
ATA/ATAPI-6ATA/100 or ATA/ATAPI-6
How do you determine what bits to use to calculate the network address?
An IP address comes in two formats: ipV4 and ipV6. In IpV4 32 bits are allocated to the IP address. In IpV6, 128 bits are allocated to the address. This is done by the protocol and is a standard for developing an IP address.
What is the ATA standard that changes the number of bits used to address data on a hard drive?
ATA/ATAPI-6 standard (aka ATA/100) allows for 48-bit addressing over the original 28-bits. This allowed for the breaking of the 137GB barrier limitation.
What is the size of today's standard (IPv4) IP address?
The size of an IPv4 address is 32 bits, or 4 bytes.
How many bits are in the Ipv4 standard?
In IP version 4, an IP address has 32 bits, or 4 bytes.In IP version 4, an IP address has 32 bits, or 4 bytes.In IP version 4, an IP address has 32 bits, or 4 bytes.In IP version 4, an IP address has 32 bits, or 4 bytes.
How many minimum number of bits that are needed to address 2000 locations?
11 bits. 211 = 2048
How many bits are in an IP address that follows the IPv6 standard?
128-bit IP addresses
How many bits wide is the ipv4 address?
32 bits. An IPv4 address looks like this: 192.168.1.1 Each number can only go from 0 to 255. That makes for 256 possible choices for each number. And 28=256, meaning that there can only be 8 bits per number. So, 8+8+8+8=32, which means that there are a total of 32 bits in an IPv4 address.
How many network and host bits are in a slash 16 network?
Assuming IP version 4 (the current standard), a complete IP address has 32 bits. /16 means that the first 16 bits specify the network; the remaining bits (also 16 in this case - calculated as 32 minus 16) specify the host.Assuming IP version 4 (the current standard), a complete IP address has 32 bits. /16 means that the first 16 bits specify the network; the remaining bits (also 16 in this case - calculated as 32 minus 16) specify the host.Assuming IP version 4 (the current standard), a complete IP address has 32 bits. /16 means that the first 16 bits specify the network; the remaining bits (also 16 in this case - calculated as 32 minus 16) specify the host.Assuming IP version 4 (the current standard), a complete IP address has 32 bits. /16 means that the first 16 bits specify the network; the remaining bits (also 16 in this case - calculated as 32 minus 16) specify the host.
What is the number of bits in a standard class B address?
16 bits example class b: nnn.nnn.0.0 - nnn.nnn.255.255 subnetmask: 255.255.0.0 example class c (8 bits): nnn.nnn.nnn.0 - nnn.nnn.nnn.255 subnetmask: 255.255.255.0 exaple class a (24 bits): nnn.0.0.0 - nnn.255.255.255 subnetmask: 255.0.0.0
How many bits are in the subnetted ID 185.27.54.0?
To determine the number of bits in the subnetted ID of 185.27.54.0, you need to know the subnet mask used. However, if it’s a standard Class B address (which uses a default mask of 255.255.0.0), it has 16 bits for the network portion. If the address is subnetted further, additional bits are borrowed from the host portion, increasing the network bit count. For example, if a subnet mask of 255.255.255.0 is used, then there would be 24 bits in the subnetted ID.
How many bits of address bus are required to address 1mb memory?
You need 20 bits of address bus to address 1 Mb of memory.
