200 pin DDR2 SODIMM is likely going to be between 200-800mhz in speed.
This is some specification for RAM modules: DDR3 240-pin DDR 2 240Pin DDR 184 Pin SDRAM 168-pin SODIMM 200-pin DDR2 SODIMM 200-pin DDR,DDR2 and DDR3 have 2 holes SDRAM have 3 holes
200
RAM are SODIMM 200-pin sticks whereas DDR is 200-pin but different pin setup. You will know instantly if you have the wrong stick since they will not fit on the other slot.
One can purchase a 1gb pc2700 333mhz 200 pin ddr sodimm memory for their laptop from Best Buy. They carry the best and lowest prices around. Their prices are unbeatable.
SODIMM 200 PIN or 72 for 32bit processor
One can buy a Kingston 1gb pc2700 Sodimm from Amazon for approximately $200, but if you get it before the stock lasts there is a discount on Amazon by 61% off which the price turns to $79.99, saving $126.81.
no of sources: 5 bandwidth required for each source= 400 Hz no of guard times= 5 bandwidth of each guard time = 200 Hz minimum bandwidth = 5 *400 + 5*200 Hz
A SO-DIMM (Small Outline Dual In-Line Memory Module) typically has either 72 pins or 200 pins, depending on the type of memory it supports. The 72-pin SO-DIMM is used for older SDRAM, while the 200-pin variant is used for DDR, DDR2, DDR3, and DDR4 memory types. The pin count is crucial for compatibility with specific motherboards and devices.
200 MHz
Were is the body control module located on 02 Saturn L 200
The signal that changes at a higher rate occupies greater bandwidth.
To determine the time it takes to send 1,000,000 bits over a channel with a bandwidth of 5 kbps (kilobits per second), you can use the formula: time = total bits / bandwidth. So, time = 1,000,000 bits / 5,000 bits per second = 200 seconds. Therefore, it takes 200 seconds to send the time frame of 1,000,000 bits.