0
What is the difference between cross connect and inter connect in structured cabling system?
Cross connect is often used when telecommunication equipments are connecting to each other. For example switches to switches and/or routers, PBX to carrier lines, etc.
Inter Connect is used when you area connecting to end users or to the computer/storage equipment in a Data Center. No matters what ends you are connecting: patch panel, switch, desktop end user.
What else can I help you with?
Difference between Straight cable and Cross Cable?
what is different between cross cabling and straight cabling ANSWER: a crossover cable is used to connect like devices, like a router to a router, but a straight through cable is used to connect dissimilar devices, like a router to a computer.
What is the purpose of horizontal cabling in a structured cable system?
Horizontal cabling is the cabling that connects the work area telecommunications room to the horizontal cross connect.
In what subsystem of a structured cabling design would you most likely cross-connect a wire between two patch panels?
In the Telco Room pg. 119 Network+Guide to Networks Edition 4.
What type of cabling would you suggest for the vertical cabling required to connect the new IDF to the existing MDF?
coaxial cable
How do I connect Electrical cabling from house to shed?
hire an electrician
Differentiante between cross cabling and straight cabling?
Straight Cable is used to connect a device to a different type of devices Eg: PC to a Switch PC to a Hub Switch to a Router E.t.c. Cross Cable is used to connect a device to a similar type of devices Eg: PC to PC Switch to Switch E.t.c.
Which technology is most often used to connect devices to a PAN?
coaxial cabling
Which on of the following answers is most accurate about the cabling of a typical modern ethernet lan?
Connect each device to a centralized LAN switch using UTP cabling
What type of cabling is the cable use to connect traditional cable TV?
dericet tv
What type of cabling use hub?
A hub uses straight throught cabling from clients to the hub, and uses a cross-over cable with the up-link ports to connect hubs to hubs. Usually, the cabling is UTP (Unshielded Twisted Pair) wiring.
What is difference between wireless and wireline network?
Whether or not a network cable is connected to your computer.
What is the difference between the Xbox and Xbox connect?
for the xbox you need a controller. for xbox connect you don't need a controller.
