The maximum distance for Ethernet 10Base2, also known as thin coaxial Ethernet, is 185 meters (or approximately 607 feet) per segment. This standard allows for a total network length of up to 2000 meters when using multiple segments connected by repeaters. It operates at a speed of 10 Mbps and uses a BNC connector for connections.
The maximum speed Ethernet of mm fiber has a transmission speed of 100 Mbit/s. The Ethernet mm fiber increases the speed from 10 to 100 megabits per second.
(From: Jean Andrews CompTIA A+ 6th Edition pg. 846) The three variations of Ethernet are primarily distinguished from one another by speed: (1) 10-Mbps Ethernet, (2) 100-Mbps or Fast Ethernet, and (3) 1000-Mbps or Gigabit Ethernet.
Base2 011 = 11 Base3 011 = 10 Any base above that: Base2(11) equals 3
10-Mbps Ethernet, 100-Mbps or Fast Ethernet, and 1000-Mbps or Gigabit Ethernet.
Category 3 LAN Cables, maximum speed is 10 Mbps. It can be used for telephones as well, option for Ethernet in years past.
30 feet, 10 meters
It would be 10Base-ER. It has a maximum rang of 40 Kilometers witch is 24.4 miles.
It would be 10Base-ER. It has a maximum rang of 40 Kilometers witch is 24.4 miles.
100BASE-T has a data trasnfer rate up to 100 Mbps. 100BASE-T is based on the older Ethernet standard. Its 10 times faster than Ethernet it is also called Fast Ethernet. The 100BASE-T standard is IEEE 802.3u
10 Base 2 uses RG58. Since this is in the Catagory for Xbox. you can not connect this directly to your Xbox, you must use 10BaseT or a converter to get from 10Base2 to ethernet with an RJ45 Connector.
10 Base 2 uses RG58. Since this is in the Catagory for Xbox. you can not connect this directly to your Xbox, you must use 10BaseT or a converter to get from 10Base2 to ethernet with an RJ45 Connector.
Stands for ethernet 10, or, a 10Mbps ethernet service offered usually by a telco.