1
The minimum bandwidth required for a multiplexed channel depends on the number of channels being multiplexed and the bandwidth of each individual channel. In general, the total minimum bandwidth needed is the sum of the bandwidths of all the channels being combined. For example, if you are multiplexing four channels, each requiring 1 MHz, a minimum bandwidth of 4 MHz would be necessary. Additionally, some multiplexing techniques may require guard bands to prevent interference, which would increase the total bandwidth requirement.
yeah
Threshold of training
To determine the theoretical minimum system bandwidth needed for a 10 Mbps signal using 16-level Pulse Amplitude Modulation (PAM), we first calculate the symbol rate. Since 16-level PAM represents 4 bits per symbol (as (2^4 = 16)), the symbol rate is (10 \text{ Mbps} / 4 \text{ bits/symbol} = 2.5 \text{ Msymbols/s}). According to the Nyquist formula, the minimum bandwidth required is half the symbol rate, which leads to a theoretical minimum bandwidth of (2.5 \text{ MHz} / 2 = 1.25 \text{ MHz}) to avoid inter-symbol interference (ISI).
Bandwidth compression is a term used in telecommunication, and it has two meanings. The first meaning of the term states that bandwidth compression is the reduction of bandwidth needed to forward a specific amount of data in a specific amount of time. The second meaning states that bandwidth compression is the reduction of time needed to forward a specific amount of data in a given bandwidth.
QoS
Skype can run on the lowest broadband bandwidth but the official answer is: Broadband is best, GPRS is not supported for voice calls, and results may vary on a satellite connection
"High bandwidth is not needed for simple blogs as there are not that many things running on the blog sites. They do not require a high amount of bandwidth, or data. It only requires people to type something out and submit it to the website for publishing. Speed or amount of data is not really a factor for simple blogs."
The minimum annual rainfall needed for agriculture field is 600 mm
The Nyquist frequency for a signal with a maximum bandwidth of 1 KHz is 500 Hz, however that will lead to aliasing unless perfect filters are available. The Nyquist rate for a signal with a maximum bandwidth of 1 KHz is 2 KHz, so the answer to the question is 2 KHz, or 500 microseconds.
The minimum number of seismographs needed to locate an epicenter of an earthquake is 3.
Isn't any minimum or maximum.