0
What else can I help you with?
Refer to the graphic Assume that the command output is from a wireless DHCP client that is connected to a Linksys integrated router What can be deduced from the output?
The wireless connection is good
How are output devices connected to the CPU?
Output devices are connected to the CPU through the northbridge and southbridge, (collectively called the chipset) but they connect to different devices. The northbridge connects to the graphics output, while the southbridge connects to all other output devices (sound, storage, network, and others).
Which piece of information is available from examining the output of the command show ip interface brief?
From the output of the "show ip interface brief" command, you can see the IP address, interface status (up or down), protocol status (up or down), and the method for obtaining the address (manual or dynamic) for each interface on the device.
The sample output from the ipconfigall command shown previously had only one MAC address. suppose the output was from a comp. that also had wireless ethernet capability. how might the output chage?
Ipconfig would list both network devices and their respective MAC addresses. It would also show their assigned IP addresses at the time as well.
The show cdp neighbors command is a very useful network troubleshooting tool. Using the output in the graphic select the statements that are true. (Choose two.)?
Without the specific output from the "show cdp neighbors" command, I can't provide exact statements. However, generally, true statements may include identifying directly connected devices and their interfaces, as well as displaying device capabilities and platform information. To select the most accurate statements, refer to the details shown in the command output regarding device types and connection interfaces.
What is the date command?
output of all command
What are two reasons for the absence of R1 in the output?
Refer to the exhibit. A network administrator successfully pings R1 from R3. Next, the administrator runs the show cdp neighbors command on R3. The output of this command is displayed.What are two reasons for the absence of R1 in the output? (Choose two.)~**The no cdp run command has been run at R1.**The no cdp enable command has been run at Fa0/1 interface of R3.R1 is powered off.
Why the transformer connected on inverter output?
A transformer is connected to the output of inverter in order to step up the AC voltage output.
What needs to take place so a circuit can have an output?
An input supply and a closed loop network.......i.e the input and ground is properly connected.
What Refers to directing the output of one command to the input of a second command?
The 'pipe' symbol connects the output of one command to the input of another (|)
You just up a new wireless network in your house and you want to determine whether your Linux laptop has connected?
Generally speaking, look for a radiowave-like icon where the network connection area in the task bar should be. If it has radio waves, you're connected to wifi. The more technical answer would be to figure out what interface your wireless card uses, and then find it in the output of ifconfig. If it has an IP address there, it's connected. But the first one is much easier
Users in the network are experiencing slow response time when doing file transfers to a remote server What command could be issued to determine if the router has experienced any input or output error?
The show interfaces command could be issued to determine if the router has experienced an input or output error.
