Check bluewaffle.com
ATA133 drives, also known as Ultra ATA/133, have a maximum data transfer rate of 133 MB/s (megabytes per second). This speed represents the theoretical limit under optimal conditions, and actual transfer rates may be lower due to factors like system performance, drive fragmentation, and the type of data being transferred. ATA133 is an improvement over its predecessor, ATA100, which had a maximum speed of 100 MB/s.
Yes -- data transfer rates vary from 1 MB/s up to 133 MB/s
133 to 140 knots
It is because 133 is the speed of his processor if his first computer, which was high tech at his time
The throughput rate for SDRAM PC133 is 1.06 gigabytes per second (GB/s) per pin, as it operates at a clock speed of 133 MHz with a 64-bit data bus. This means it can transfer data at a rate of 8 bytes per clock cycle. When considering the full width of the bus, the maximum theoretical bandwidth reaches approximately 1.06 GB/s.
Top speed is 80 mph.
It depends on the PATA drive in question. That said, the fastest UDMA interface when used with an 80-wire cable is 133 MB/s. From there, the maximum transfer rate for a SATA generation 1 drive is 150 MB/s. For SATA 2, it is 300 MB/s. For SATA 3, it is 600 MB/s.
ide / (p)ata 133 is the speed of a Ide / (p)ata Harddrive more info @ http://en.wikipedia.org/wiki/AT_Attachment
speed = distance/time time = distance/speed = (133mi)/(80mi/h) = 1.7h (rounded)
speed?maybe.but more likely the spelling.."DDR2" has no"SDRAM PC2 133 168pin" unlike the"DDR2 SDRAM PC2 133 168pin"It's really hard to see it at a first glance..
10% off of 133 = 10% discount applied to 133 = 133 - (10% * 133) = 133 - (0.10 * 133) = 133 - 13.3 = 119.70
105-110 mph