INPUT: AC 120V 60Hz
OUTPUT: DC 12V 200mA
To charge your iPhone in Europe, you will need a plug adapter to fit the European outlets and a voltage converter if your charger is not compatible with the higher voltage in Europe. Simply plug your charger into the adapter and then into the outlet to charge your iPhone.
Sure thing. The voltage is correct, and it has enough capacity. Make sure that you get the negative and positive polarity right if you are putting your own connector on. Usually they have a graphic, showing that negative is in the center of the plug, and positive on the outer etc.
Check the charger, if the charger says 100-240V you probably do not need one, also check the Hertz (Hz) information (also printed on the charger). This site has good information on the Voltage and Hertz for many countries. http://www.kropla.com/electric2.htm
An Apple Lightning charger typically operates at a voltage of 5 volts for standard charging. However, when using a compatible fast charger, the voltage can increase to 9 volts or higher, depending on the power adapter and the device being charged. This allows for quicker charging times while maintaining compatibility with various Apple devices.
NO!!!!! Find a charger with the same voltage!! If not, you will fry your battery. The only electrical number you can go higher on is the milliwats.
No. You need to use the exact battery charger for the battery specified by the manufacturer, in order to achieve the correct charge cutoff point. In particular NiCad and similar batteries detect full charge by detecting the knee point in voltage per unit time given a specific charge current. Using the wrong charger could result in overcharge which will damage the battery.
the voltage of a laptop charger is in between fifteen to twenty four voltage.
Get a mains adapter at a travel store to connect your charger's two-blade Edison plug to the UK's BS 1363 standard. The charger itself is universal voltage, so it accepts 100-240V input.
In some instances a charger can be used in place of an AC adaptor. The one thing to keep in mind is that the output of a charger is not filtered as other power supplies are. The output of a charger will have a high degree of DC ripple voltage.
NO, voltage of the charger must match the battery voltage.
If you mean does it work in say North America and Europe Then yes it will accept both voltages. This is because the charger has an adapter, the adapter will be able to take the electrical current and convert it to a very small voltage. This will be most likely around 6 volts with a very low amperage. hope I helped.
To ensure compatibility between your airplane laptop charger and the power outlets on board, check the voltage requirements of your charger and the power outlets on the plane. Most airplanes provide power outlets with a voltage of around 110-120V, so make sure your charger is compatible with this range. Additionally, consider using a universal adapter or converter if needed to ensure a proper connection.