0
No. You need to use the exact battery charger for the battery specified by the manufacturer, in order to achieve the correct charge cutoff point. In particular NiCad and similar batteries detect full charge by detecting the knee point in voltage per unit time given a specific charge current. Using the wrong charger could result in overcharge which will damage the battery.
What else can I help you with?
Can you use a 9V 600mA adapter on a 9V 400ma scanner?
You can use any 9v adapter as long as the output amperage is rated higher than the amperage rating of your appliance so yes a 600ma adapter can be used to power a 500ma or 400ma appliance
Can you use a 6 volt adapter with 200mA in place of 6 volt adapter with 600mA?
Yes, you can use a 6-volt adapter with 200mA in place of a 6-volt adapter with 600mA, but it depends on the device's power requirements. If the device requires more than 200mA to operate, it may not function properly or could potentially damage the adapter. However, if the device draws less than 200mA, the lower-rated adapter may work fine, but it could overheat or fail if the demand exceeds its capacity. Always check the device's specifications for safe operation.
Can a 6volt 600 milliamps adopter be substituted for a 6 volts 100 milliamps adopter?
Yes, you can substitute a 6V 600mA adapter for a 6V 100mA adapter. The important thing is to match the voltage (6V) while ensuring the new adapter can supply at least the same current (milliamps) as the original, to avoid damaging the device or causing underperformance. In this case, the 600mA adapter has a higher current capacity, which is safe to use with a device that previously used a 100mA adapter.
Can you use a 9v 600Ma adaptor to power a 9v 300Ma appliance?
I think you mean to ask if one can use a 9v 600mA adapter to power a 9v 300mA appliance. Yes, you can do that. A 9v 600mA adapter will deliver 9v at up to 600mA. A mA is one milli amp, or one thousandth of an amp. 300mA is 300 thousandth of an amp, 300/1000 or 0.3 amps. 600mA is 600 thousandth of an amp, 600/1000 or 0.6 amps, and is twice the current of 300mA.
Can you use a 12v 1000mA on a device that requires 600mA?
yes this will work fine
Can you use 6V DC 1000mA adapter in place of 6V DC 600mA adapter?
Yes you can. Given the fact you're talking about milliamps - the slight increase in amps will have no detrimental effect.
Is it safe to use a 5v 1200ma router power adapter instead 9v 600ma adapter the original one for a longer period because everything works fine for now?
no .never
Can you use 12v 600ma instead of 12v 500ma?
Using a 12v 600ma source is allowing 12 volts and 600 amps of power. If the device requires a 12v 500ma source, the larger source is acceptable. Please note that it will only be drawing on 500ma of the available 600ma.
Can you use a 9V 600MA to replace a 9V 1A?
Using a 9V 600mA power supply to replace a 9V 1A power supply may not provide enough current to power the device properly. It is important to match the voltage and exceed the current requirements of the device to avoid damage or malfunction.
Can you use a 300mA adaptor on a 1A device?
Yes, you can use a 300mA adapter on a 1A device, but it may not work properly or could damage the adapter. The device may draw more current than the adapter can provide, leading to insufficient power, potential overheating, or failure of the adapter. It's always best to use an adapter that meets or exceeds the device's current requirements for optimal performance and safety.
What would happen if you used a 600mA adaptor instead of a 500mA?
Using a 600mA adaptor instead of a 500mA one could potentially supply more current to the device than it is designed for. Depending on the device's circuitry, this can lead to overheating and damage, especially if the device is not designed to handle the extra current. It's generally safer to use an adaptor with the recommended current rating for the device.
How do you use a travel adapter to charge your devices while traveling?
To use a travel adapter to charge your devices while traveling, first plug the adapter into the wall outlet in the country you are visiting. Then, plug your device's charging cable into the adapter. Make sure the voltage on the adapter matches the voltage requirements of your device. Finally, connect your device to the charging cable and wait for it to charge.
