0
What else can I help you with?
Can you use 12v 600ma instead of 12v 500ma?
Using a 12v 600ma source is allowing 12 volts and 600 amps of power. If the device requires a 12v 500ma source, the larger source is acceptable. Please note that it will only be drawing on 500ma of the available 600ma.
Can a 12v 550ma device be run by a 12v 210ma supply?
No, the supplies output is too small. To run a 550mA device a supply source of 600mA and larger would be needed.
Can you use 12v 1000ma instead 12v 150ma?
12v 1000mA means that the maximum output of that unit is 1000 milliamps at 12 volts. 12v 150 mA means that the maximum output of that unit is 150 milliamps at 12 volts. So if you need 150 milliamps at 12v either will do. BUT if you need over 150 milliamps at 12v then you must go for the 1000 mA unit. By the way there are 1000 milliamps in 1 amp.
Will a 12v lithium battery rated at 1000ma run a 12v 100w light bulb?
no
Will a 120V 60Hz 275W operate properly with 12V DC 1000mA electrical supply?
No, a device rated for 120V 60Hz 275W will not operate properly with a 12V DC 1000mA electrical supply. The voltage and wattage requirements of the device are significantly different from what the 12V DC supply provides, which will likely result in malfunction or damage to the device. It is important to use an electrical supply that matches the specifications of the device for safe and proper operation.
For a device requiring DC 12V 2Amps will a DC adapter output 12V 1000ma also work for this device?
Assuming the plug fits, and that the polarity is correct it'll work fine. Drawing less amps than the source can deliver isn't a problem, it'd be a bit like filling a glass from a pitcher. Drawing more amps than the source can deliver is what you need to watch out for, that can cause overheating and all sorts of nasty failures.
For a device requiring DC 12v 1000mA will a DC adapter with output 12v 2.7A also work?
No, because the provided rating of 12volt, 2.7Amp equivalent to 2700 mA (milli amphere) is a much higher as to the adapter said 12volt, 1000 mA (Milli Amphere).
Can you use a 12V DC adapter for 5V DC device?
input voltage is strictly according to applications. If use 12V dc adapter power 5V dc device, the 5v dc device would be damaged.
For a device requireing 12v 1.5A will a DC adaptor output 12v 2A also work for this device?
Yes, a DC adaptor outputting 12V and 2A will work for a device that requires 12V and 1.5A. The adaptor can provide up to 2A, which means it can supply the necessary current without overloading. Just ensure that the voltage matches (12V) and the polarity is correct for safe operation.
What happens if 12V-1200mA supply is given to 12V-700mA device?
It will work fine as long as the supply voltage matches the device. They both must be 12V, and both usually must be the same type-- either AC or DC. The supply current must be at least as much as the device requires.
Can you use a 12v power adapter when device requires 6v?
No, twice the voltage applied to a device that only requires 6 volts will probably destroy the device. When a manufacturer of equipment states a required voltage for a device that is the voltage that must be used.
Will a 12v 1300ma operater a 12v 2.0 amp chair?
No, a 12V 1300mA power supply will not be sufficient to operate a device that requires 12V 2.0A. The device will not receive enough current to function properly and may be at risk of damage. It's important to match the voltage and meet or exceed the amperage requirements of a device when selecting a power supply.
