0
What else can I help you with?
The administrator would identify which address as the address to which all hosts send packets that are destined for an outside network?
10.10.10.6
Can 255.255.255.255 have hosts?
No, 255.255.255.255 is a special address known as the limited broadcast address in IPv4. It is used to send packets to all hosts on the local network segment and cannot be assigned to any individual host. Therefore, it does not have hosts associated with it.
What three facts are true about the network portion of an IPv4 address?
The IPv4 address is identical for all hosts in a broadcast domain. The IPv4 addresse varies in length. The IPv4 address is used to forward packets.
Can CPU handle the broadcast address on LAN?
All load-balancing solutions require system resources to examine incoming packets and make load-balancing decisions, and thus impose an overhead on network performance. [ Dispatcher-based solutions examine, modify, and retransmit packets to particular cluster hosts. (They usually modify IP addresses to retarget packets from a virtual IP address to a particular host's IP address.) In contrast, Network Load Balancing simultaneously delivers incoming packets to all cluster hosts and applies a filtering algorithm that discards packets on all but the desired host. Filtering imposes less overhead on packet delivery than re-routing, which results in lower response time and higher overall throughput.
What facts are true about the network portion of an IPv4 address?
Here are 3 facts about the network portion of an IPv4 address.Identical for all hosts in a broadcast domainVaries in lengthIs used to forward packets
What is the purpose of sequence number SEQ equals in TCP data packets?
It is used to keep track of the data packets being sent to and from hosts.
What type of server is commonly used to allow multiple hosts to simultaneously access an out side network such as the internet using a single IP address?
It isn't the server as much as the protocol that supports this. A NAT gateway or NAT proxy (and its variants such as DNAT, PAT, etc.) allow multiple internal LAN clients with different addresses to use the same outside IP address.
What is sequence number in tcp?
It is used to keep track of the data packets being sent to and from hosts.
What is Network and Host portion in an IP address?
Here are 3 facts about the network portion of an IPV4 address. 1. identical for all hosts in a broadcast domain 2. varies in length 3. is used to forward packets
What uses a single public IP address to access the Internet on behalf of all of the hosts on the network that may be using other IP addresses or private IP?
NAT - Network Address Translation.
Which of the folllowing uses a single public IP address to access the Internet on behalf of all of the hosts on the network that may be using other IP addresses or private IP addresses?
•If the hosts on a network using private IP addresses need to access the Internet, a problem arises because the private IP addresses are not allowed on the Internet. •The solution is to use NAT (Network Address Translation), which uses a single public IP address to access the Internet on behalf of all hosts on the network using other IP addresses.
In MikroTik RouterOS Layer-3 communication between 2 hosts can be achieved by using an address subnet of?
In MikroTik RouterOS, Layer-3 communication between two hosts can be achieved using an address subnet of at least a /30 (255.255.255.252) for point-to-point links or larger subnets like /24 (255.255.255.0) for networks with multiple hosts. Each host must have a unique IP address within the same subnet, and they must be correctly configured with the appropriate gateway settings. Proper routing must also be established to facilitate communication between the hosts.
