The volume of 100 millilitre of hydrochloric acid is:100 mL
There are 30 liters of hydrochloric acid in 300 liters of a solution that is 10% hydrochloric acid by volume.
A 2M solution of hydrochloric acid would contain 2 moles of hydrochloric acid per liter of solution. To determine the amount of hydrochloric acid in a certain volume of 2M solution, you can use the formula: moles = Molarity x Volume (in liters).
A glass or polymeric (polyethylene, polypropylene, Teflon) graduated cylinder - 25-50 mL capacity.
To prepare 0.01 N hydrochloric acid, you would need to dilute concentrated hydrochloric acid (typically 37% concentration) with distilled water in a volumetric flask. Calculate the volume of concentrated acid needed based on the desired final volume and concentration of the solution. Be sure to wear appropriate safety gear and handle the concentrated acid with caution.
Dilute hydrochloric acid has a lower concentration of HCl compared to concentrated hydrochloric acid. This means that there is less HCl in a given volume of dilute acid compared to concentrated acid. Dilute hydrochloric acid is typically less corrosive and has milder effects compared to concentrated hydrochloric acid.
because pH is the measure of how much acid it contains it would change if you added more
In order to discuss pH the acid has to be dissolved in a measured volume of solvent (in this case probably water). A mole is a measure of amount. So all you have given us is an amount of acid. We also have to know the amount of water you are going to use to make the solution.
To prepare a 0.01M methanolic hydrochloric acid solution, mix the appropriate volume of concentrated hydrochloric acid with methanol to achieve the desired concentration. For example, to make 1L of 0.01M solution, dilute 8.9mL of concentrated hydrochloric acid (37%) with methanol and then dilute to the final volume with methanol. Make sure to handle concentrated hydrochloric acid with caution and wear appropriate protective equipment.
A graduated cylinder or a volumetric flask would be suitable for measuring 26.0 mL of dilute hydrochloric acid with precision. These pieces of equipment are designed to accurately measure volumes of liquids.
To make 50% hydrochloric acid (HCl), you would need to dilute concentrated hydrochloric acid (typically around 37%) with water. Measure out the appropriate amount of concentrated HCl and add an equal volume of water to achieve the desired concentration. Always add acid to water slowly and with stirring to prevent splashing or overheating.
Yes. It is an acid as its name would imply.