0
What else can I help you with?
Is a gyro sharper or a straight cable?
A straight cable will be sharper, have less play in the system.
What should be the distance between underground power cable and telephone cable?
300mm
A nonshielded cable with a 1.5-inch diameter should have a minimum bending radius of A 6.0 inB 12.0 inC 1.5 inD 18.0 in?
The minimum bending radius for a nonshielded cable is typically 8 to 10 times the diameter of the cable. For a cable with a 1.5-inch diameter, this would mean a minimum bending radius of 12 to 15 inches. Therefore, the closest correct answer is B, 12.0 inches.
What should you do to avoid danger from underground cables or wires?
To avoid danger from an underground cable or wire, you should call before you dig. That way you do not accidentally get hurt.
What is underground feeder cable?
It is a cable that feeds.
What is the minimum bend radius for the diameter of cable?
It depends on the cable. 0 to 5000 volts the minimum bending radius is 6 x diameter of the cable. Above 5000 volts the minimum bending radius is 8 x the diameter of the cable.
What is the bending radius of HT cable?
15 D
How do you design an 11kv underground cable?
It is not necessary to design an 11 kv underground cable. There are several 11 kv underground cables already on the market. You can choose exactly which cable will fit best for your project and purchase it.
What is he minimum bending radius of a 1.5 inch diameter non shielded cable?
The minimum bending radius for a 1.5-inch diameter non-shielded cable typically ranges from 6 to 10 times the cable's diameter, depending on the specific type and application of the cable. For a 1.5-inch diameter cable, this translates to a minimum bending radius of approximately 9 to 15 inches. It's important to consult the manufacturer's specifications for the exact bending radius to ensure optimal performance and prevent damage.
What type of armour cable to you need to run underground to your garage?
Armoured cable is not rated for underground installations. You have to use a cable with a designation for direct burial or wet and damp locations.
What is the best cable burying tool for burying cables underground efficiently and effectively?
The best cable burying tool for burying cables underground efficiently and effectively is a cable trencher.
What is bending radius for MICS cable?
The bending radius for MICS (Microphone Integrated Circuit) cable typically refers to the minimum radius that the cable can be bent without causing damage or degradation to its performance. This value can vary depending on the specific cable design and manufacturer, but it is generally recommended to maintain a bending radius of at least 10 times the cable's diameter. Adhering to this guideline helps prevent issues like signal loss or cable breakage. Always consult the manufacturer's specifications for the most accurate information.
