0
What else can I help you with?
Select the best definition for the network term DHCP?
A protocol that lets one device on a local network, known as a DHCP server, assign temporary IP addresses to the other network devices
Which protocol is used to automatically configure network devices?
Dynamic Host Configuration Protocol (DHCP) A protocol that provides a means to dynamically allocate IP addresses to computers on a local area network. The system administrator assigns a range of IP addresses to DHCP and each client computer on the LAN has its TCP/IP software configured to request an IP address from the DHCP server. The request and grant process uses a lease concept with a controllable time period.
What is 169.255.255.0?
The IP address 169.255.255.0 is part of the larger address block designated for link-local addresses in the Internet Protocol version 4 (IPv4). This specific address is technically reserved and is not typically assigned to hosts on a network. Instead, link-local addresses are used for communication within a local network segment. In practice, addresses in the 169.254.0.0/16 range are automatically assigned to devices when they cannot obtain an IP address from a DHCP server.
What is the primary purpose of ARP?
The primary purpose of the Address Resolution Protocol (ARP) is to map an IP address to a MAC address in a local network. This allows devices on a network to communicate with each other using their unique MAC addresses. ARP is crucial for proper functioning of Ethernet-based networks.
Why doesn't a PC arp for off-nework devices?
A PC does not ARP for off-network devices because ARP (Address Resolution Protocol) is designed to resolve IP addresses to MAC addresses within the same local network segment. When a device needs to communicate with an off-network device, it sends the data to its default gateway (router), which then handles the routing to the destination network. The PC only performs ARP to identify devices on its local network, as it does not know the MAC addresses of devices outside its subnet. Thus, it relies on the router to manage off-network communications.
Can I replace my dns service provider?
Go to your network connection and select your local network - properties, Internet Protocol (TCP/IP) - prperties. Select "Use the following DNS server addresses" and enter the desired DNS server.
What is the protocol responsible for locating a host on a local network?
ARP
What is the role of Network Address Translation of IPv4 address space?
Network Address Translation translates and IP address used in a network to another IP address known within another network. A NAT table is maintained for global to local and local to mapping of IP's. NAT can be statically defined or dynamically translate from a pool of addresses. The NAT router is responsible for translating traffic coming and leaving the network. NAT prevents malicious activity initiated by outside hosts from reaching local hosts by being dependent on a machine on the local network to initiate any connection to hosts on the other side of the router
8 Which network protocol has the slowest transmission speed?
Local Talk is the network protocol that has the slowest transmission speed. Local Talk was developed by Apple Computer, Inc.
Is your ip address assigned to your router or to each computer on the network?
Your Router is assigned an IP address that is known as a public IP address then your router assigns out IP addresses that are known as local IP addresses. So the answer is yes and yes!
STP is internet Protocol or not?
Not exactly Internet. STP is a protocol used between switches within a local area network.Not exactly Internet. STP is a protocol used between switches within a local area network.Not exactly Internet. STP is a protocol used between switches within a local area network.Not exactly Internet. STP is a protocol used between switches within a local area network.
What elements might the data link layer add to its pdu a physical addresses b logical addresses c data d crc?
The data link layer typically adds physical addresses (also known as MAC addresses) to its Protocol Data Unit (PDU) to ensure that data is delivered to the correct device on a local network. Additionally, it often includes a CRC (Cyclic Redundancy Check) for error detection, ensuring the integrity of the transmitted data. Logical addresses and the original data payload are not added at this layer; logical addressing is handled at the network layer above it.
