0
What else can I help you with?
How is blocking related to a crossbar switch?
: Blocking can occur when two switch inputs attempt to access the same intermediate switch channel.
When refering to a hub or switch what is a port?
Port in hub/switch refers to the interface where you connect your computers.
How do you switch the interface of GstarCAD to Classic interface?
From GstarCAD 2011, the Ribbon interface was added as the default interface, but the classic interface is still popular as well, so GstarCAD provides a convenient way to switch between them. Way 1: Find "Style" at upper-right corner to select "Classic interface" in the menu. You can also select the interface style in it. Way 2: Type the WS command, and input 3 for Classic interface, or input 1 for Ribbon interface.
When implementing a router-on-a-stick what must be configured on the router to ensure connectivity?
When implementing a router-on-a-stick configuration, you must create sub-interfaces on the router's physical interface connected to the switch, with each sub-interface assigned to a different VLAN. Each sub-interface should be configured with an IP address corresponding to its VLAN's subnet, and the encapsulation type (usually 802.1Q) must be specified for each sub-interface. Additionally, ensure that the switch ports connected to the router are set to trunk mode to allow multiple VLAN traffic to pass through the link.
What switching technique allows you to funnel traffic belonging to more than one VLAN through a single switch interface?
The answer is 'Trunking'. The definition of trunking is = The aggregation of multiple logical connections on one physical connection between connectivity devices. In the case of VLANS, trunking allows data from multiple VLANS to share interface on a switch. Network + Guide To Networks Review Question Chapter 6 #18
What is a non-blocking switch fabric?
is when all the switched ports have connections to the switch fabric equal to their line speed
What is a non blocking switch fabric?
is when all the switched ports have connections to the switch fabric equal to their line speed
What is rxois?
It refers to the Interface Switch (IS). it allows the RBS speak to the TRX's.
Which switch interface would an administrator configure an IP address so that the switch can be managed remotely?
vty 0
What interface configuration mode command puts a layer 3 switch interface into layer 3 mode?
global configuration mode
What type of cable used to connect the Ethernet interface on a switch to the Ethernet interface on a router?
To the switch the router is just another host, so it connects with a straight Cat 5 or Cat 6 cable.
What is the purpose of the switch command switch port access vlan 99?
the switchport access vlan 99 command is used to designate a specific VLAN for a switch port, allowing you to control how traffic on that port is treated and segregated from traffic on other ports and VLANs in the network. This is a fundamental configuration step in building and managing VLANs within a network infrastructure.
