USB cables can carry both data and power. If the device attached by the USB cord is drawing a lot of power this could possibly cause your cord to heat up, especially if there were a fault in the cord itself. The best way to test the cord is to simply replace it with another cord you think is good and see if it heats up also.
it means that your usb cord is messed up
Depends. Did you have My Computer pulled up the moment you plugged in the USB? If so, close the program, wait a couple of minutes, then try to access the device again. If it still does not show, then you have a faulty USB device and you will need to buy a new one.
The Be-Bratz Necklace is a usb cable that can be plugged in either your PC/Mac or your PlayStation 3.
You don't need to use two mics. You only use the USB-6 mic plugged into one of your USB ports. That's it. You set it up with the online instructions and you're set to go.
USB devices take power from the device they are plugged into to operate. The message is a warning warning suggesting you unplug the USB devices to conserve the power of the tablet's battery.
Try re-installing the drivers or any software that came with your peripherals.
A standard USB port (non 3.0) can provide up to 500mAh of power. This is on full power mode. A 3.0 port can, if plugged into a 3.0 device, provide up to 900mAh if configured to do so.
The kettle has to be plugged in to an energy supply before it can heat up.
An active USB hub is a USB hub which has its own power supply. It will come with a DC power adaptor to power it. The USB system in your computer is capable of providing electrical power to devices which are plugged into it. When a large number of devices, or some particularly power-hungry devices are plugged into the USB system, it is possible to overexert this system. An active USB hub shores up this this power reducing the likelyhood of problems. A passive USB hub does not. Additionally, USB devices will often not work properly with more than 12 feet of cable. An active USB hub (or active USB extension cable) can help to overcome this limitation.
Any camcorder usualy can be plugged in a computer and most of them now come with the USB cable to directly hook them up .
Most newer cameras come with USB ports and cords to match. You might ask someone who is familiar with computer cords if your camera has a USB port, and what size plug it takes. USB ports on computers are all the same size. Also, take a look in your camera manual, or you could take it to a shop that sells equipment and find out there.
It could be a faulty USB cable. Make sure the camera is switched on, some need to be powered up as well as plugged in.